Table of Contents
Advertisement
6
6
Home Menu
Using the Home Menu
The following section shows you how to make detailed
settings to specify how you're using the receiver, and also
explains how to fine-tune individual speaker system settings
to your liking.
Important
•
The OSD will not appear if you have connected using the
composite output to your TV. Use HDMI connections for
Home Menu.
•
If headphones are connected to the receiver, disconnect
them.
•
You can't use the Home Menu when the USB input is
selected.
AV
AV
ADJUST
ADJUST
RECEIVER
RECEIVER
RECEIVER
RECEIVER
AUDIO SEL
AUDIO SEL
AUDIO SEL
AUDIO SEL
HOME
HOME
HOME
HOME
MENU
MENU
MENU
MENU
DVD
DVD
SAT
SAT
STREAM BOX
STREAM BOX
1
Switch on the receiver and your TV.
Press
to switch on.
ÍRECEIVER
2
Switch the TV input to the input that connects this
receiver to the TV through the corresponding HDMI
cable.
3
HOME
MENU.
Press
The Home Menu appears on your TV. Use
ENTER
and
on the remote control to navigate through
the screens and select menu items. Press
exit the current menu.
HOME MENU
•
Press
at any time to exit the Home
Menu.
4
Select the setting you want to adjust.
Home Menu
•
Full Auto MCACC – This is a quick and effective
automatic surround setup (see
surround sound (MCACC) on page
•
Manual SP Setup
Speaker Setting – Specify the size and number of
-
speakers you've connected (see below).
VOLUME
VOLUME
VOLUME
VOLUME
X.Over – Specify which frequencies will be sent to the
MUTE
MUTE
-
subwoofer
(page
Channel Level – Adjust the overall balance of your
-
speaker system
Speaker Distance – Specify the distance of your
-
speakers from the listening position
RETURN
RETURN
RETURN
RETURN
•
Input Assign – Specify what you've connected to the
(CD) audio input (see
•
Auto Power Down – Sets to automatically turn off the
power when the receiver has not operated for several
hours (see
The Auto Power Down menu on page
•
HDMI Setup – Set the audio return channel function and
set the HDMI input signal to Standby Through output or
not during standby (see
page
33).
•
DAB Setup – Scan stations and set DAB DRC
///
RETURN
to
1.Full Auto MCACC
2.Manual SP Setup
3.Input Assign
4.Auto Power Down
5.HDMI Setup
6.DAB Setup
Return
Automatically setting up for
16).
31).
(page
31).
(page
32).
The Input Assign menu on page
32).
32).
The HDMI Setup menu on
(page
34).
30
Manual speaker setup
This receiver allows you to make detailed settings to optimize
the surround sound performance. You only need to make
these settings once (unless you change the placement of
your current speaker system or add new speakers).
These settings are designed to fine-tune your system, but if
you're satisfied with the settings made in
setting up for surround sound (MCACC) on page
necessary to make all of these settings.
Speaker Setting
Use this setting to specify your speaker configuration (size,
number of speakers).
It is a good idea to make sure that the settings made in
Automatically setting up for surround sound (MCACC) on
page 16
are correct.
1
Select 'Manual SP Setup' from the Home Menu.
2
Select 'Speaker Setting' from the Manual SP Setup
menu.
2a.Speaker Setting
2.Manual SP Setup
Front
a.Speaker Setting
b.X.Over
Center
Surr
c.Channel Level
d.Speaker Distance
Subwoofer:
Return
3
Choose the set of speakers that you want to set then
select a speaker size.
Use
/
to select the size (and number) of each of the
following speakers:
•
Front – Select LARGE if your front speakers reproduce
bass frequencies effectively, or if you didn't connect a
subwoofer. Select SMALL to send the bass frequencies to
the subwoofer.
•
Center – Select LARGE if your center speaker
reproduces bass frequencies effectively, or select SMALL
to send bass frequencies to the other speakers or
subwoofer. If you didn't connect a center speaker, choose
NO (the center channel is sent to the other speakers).
2
4
Automatically
35
16, it isn't
SMALL
[
NO
]
[
NO
]
YES
Return
Advertisement
Table of Contents
