Snapper 20SPWM48 Owner's Manual page 15

ASSEMBLY
INSTALLING/REMOVING THE MULCHING PLUG (See Figure 5)
• To remove the mulching plug, lift the rear cover (1).
• Grasp the handle (2) of the mulching plug. Lift and pull the mulching plug
out using the handle.
• The mulching plug (3) is inserted at an angle, so it requires some force to
remove it.
• The mulching plug must be removed in order to install the grass catcher
bag.
• The mulching plug must be re-installed when the grass catcher bag is
removed.
(1)
(2) (3)
15
Fig. 5