Table of Contents
Advertisement
Selecting and Adjusting the Screen
How to adjust the OSD (On Screen Display) screen
Pops up
Move where
the menu
you want to
adjust
screen
1
Press the MENU Button, then the main menu of the OSD appears.
2
To access a control, use the
3
When the icon you want becomes highlighted, press the SET Button.
4
Use the
5
Accept the changes by pressing the SET Button.
6
Exit the OSD by pressing the EXIT Button.
How to adjust the screen automatically
You need to adjust the screen display when connecting the product to
a new computer or changing the mode. Refer to the following section to
set an optimal product screen.
Press the AUTO/SELECT button (AUTO button in a remote Control) in
the PC analog signal. Then, an optimal screen status will be selected
that fits into the current mode.
If adjustment is not satisfactory, you need to adjust screen position,
clock and phase in the OSD menu.
Move where
Select a
menu icon
you want to
adjust
• Use the remote control to adjust the OSD screen.
Buttons.
Buttons to adjust the item to the desired level.
Select a
Adjust the status
menu icon
[When XGA Mode is active and
1360 X768 is selected]
19
Save
Exit from the
adjustment
menu screen.
Advertisement
Table of Contents
