Table of Contents
Advertisement
Selecting and Adjusting the Screen
How to adjust the OSD (On Screen Display) screen.
Move where
Pops up
Select a
you want to
the menu
menu icon
adjust
screen
1
Press the MENU Button, then the main menu of the OSD appears.
2
To access a control, use the
3
When the icon you want becomes highlighted, press the OK Button.
4
Use the
Buttons to adjust the item to the desired level.
5
Accept the changes by pressing the OK Button and MENU Button.
6
Exit the OSD by pressing the EXIT Button.
How to adjust the screen automatically.
You need to adjust the screen display when connecting the product to a
new computer or changing the mode. Refer to the following section to
set an optimal product screen.
Press the AUTO/SELECT button (AUTO button in a remote control) in
the PC analog signal. Then, an optimal screen status will be selected
that fits into the current mode.
If adjustment is not satisfactory, you need to adjust screen position,
clock and phase in the OSD menu.
or
Move where
Select a
you want to
menu icon
adjust
• Use the remote control to adjust the OSD screen.
Buttons.
A27
Adjust the
Exit from
Save/Select
status
the menu
adjustment
screen.
Advertisement
Table of Contents
