LG W2343T User Manual page 12

Control Panel Functions
AUTO/SET
Button
Power Button
Power Indicator
Use these buttons to select or adjust functions in the
Buttons
On Screen Display.
For more information, refer to page A15.
Use this button to make D-Sub or DVI connector
active. This feature is used when two computers are
connected to the display. The default setting is D-Sub.
Use this button to enter a selection in the On Screen
Display.
AUTO IMAGE ADJUSTMENT
When adjusting your display settings, always press
the AUTO/SET button before entering the On Screen
Display(OSD). This will automatically adjust your
display image to the ideal settings for the current
screen resolution size (display mode).
The best display mode is
-W2043T : 1600 x 900
-W2243T/W2343T : 1920 x 1080
Use this button to turn the display on or off.
This Indicator lights up as red when the display is
operating normally(On Mode). If the display is in
Sleep Mode (Energy Saving), this indicator color
changes to flicker.
A9