Auto Image Adjustment - LG E2350S User Manual

Control Panel Functions
AUTO Button
INPUT Button
(SOURCE Hot key)
EXIT Button
Power Button &
Power Indicator
Light sensor
Use this button to enter a selection in the On Screen
Display.

AUTO IMAGE ADJUSTMENT

When adjusting your display settings, always press
the AUTO button before entering the On Screen
Display(OSD). (Only Analog Mode)
This will automatically adjust your display image to
the ideal settings for the current screen resolution
size (display mode).
The best display mode is
E2050S/E2050T : 1600 x 900
E2250S/E2250T : 1920 x 1080
E2350S/E2350T : 1920 x 1080
Use this button to enter a selection in the On Screen
Display.
When two input signals are connected, you can select the
input signal (D-SUB/DVI) you want. When only one signal
is connected, it is automatically detected. The default
setting is D-Sub.
(Only E2050T/E2250T/E2350T )
Use these buttons to exit the On Screen Display.
Use this button to turn the display on or off.
The power indicator stays white if the display is running
properly (On Mode). If the display is in Sleep Mode
(Energy Saving), the power indicator is blinking white
This is lens for light sensor sletect outside luminance,
when setting AUTO BRIGHT ON.
12