Auto Image Adjustment - LG W2453V User Manual

..... _c_itrQ_iiiiii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ ......
Usethesebuttonsto selector adjustfunctions in the On
_T,A Buttons
ScreenDisplay.
_T Button
( .]_-ENGINE )
For more information,refer to page A18 -A19.
J:ENGINE
A Bu_on
(SOURCE)
AUTO/SET
Button
Use this button to make either D-Sub,DVI or HDMI
connector active. This feature is used when two
computers are connected to the display. The default
setting is D-Sub.
Use this button to select an icon in the On Screen
Display.
AUTO IMAGE ADJUSTMENT
When adjusting your display settings, always press
the AUTO/SET button prior to entering the On
Screen Display(OSD). This will automatically adjust
your display image to the ideal settings for the
current screen resolution size (display mode).
The best display mode is:
W2453V'1920 x 1080
Power Button
Use this button to turn the display on or off.
Power Indicator
This Indicator lights up as red when the display is
operating normally(On Mode). If the display is in
Sleep Mode (Energy Saving), this indicator color
changes to flicker.
O Light Sensor This is lens for light sensor sletect outside luminance,
when setting AUTO BRIGHT ON.