Conquer AR517/CQL1590-B Instruction Manual

Advertisement

AR517/CQL1590-B
Instruction Manual (Read before proceeding)

Power:

Works on internal rechargeable Lithium battery. Please charge your speaker fully
before first use. To charge the battery :
Using a Micro USB cable (included), insert the jack into "Charging" jack located at the
back of the unit and then plug the USB connecter into the USB port on a computer for
charging.
A red light at the back will indicate the charging situation. When battery is full, the red
light will turn off automatically.

Bluetooth Speaker Operation

Turn on the unit by pushing the switch at the back. A Blue light aside will start blinking
to indicate the speaker is in paring mode and searching for your Bluetooth mobile
device.
Bluetooth speaker device name is "SB-01", connect it via the option menu of your
mobile device, pairing mode is 0000 if any is required. The Blue light will begin to
flashing slowly after pair is complete.
Start playing music on your device. Keep your device within 33feet (10m) of your
speaker.
Adjust the volume of your device to a comfortable level.
Turn off the unit when not in used.
Caution:
This is not a toy. Please keep away from children.
Please keep away from water / heat.
Low power may cause poor connection even no working of Bluetooth.
Do not overcharge the battery.
Bluetooth Speaker

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AR517/CQL1590-B and is the answer not in the manual?

Questions and answers

Summary of Contents for Conquer AR517/CQL1590-B

  • Page 1 AR517/CQL1590-B Bluetooth Speaker Instruction Manual (Read before proceeding) Power: Works on internal rechargeable Lithium battery. Please charge your speaker fully before first use. To charge the battery : Using a Micro USB cable (included), insert the jack into ”Charging” jack located at the back of the unit and then plug the USB connecter into the USB port on a computer for charging.
  • Page 2 FCC Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

Table of Contents