Conquer CQL1618-B Instruction Manual

Power:
Please charge your Bluetooth speaker fully before its first use.
To charge the battery:
Using a Micro USB Charging Cable (included), insert the USB power cable into the micro USB
port located on the back of the speaker. Connect the other end of the USB cord into a
powered USB source such as a computer, laptop or USB AC adapter.
When your Bluetooth speaker is charging, the indicator light will turn red.
Once your Bluetooth speaker is fully charged, the red light will turn off.
Playing Music via Bluetooth
Turn your Bluetooth speaker on by sliding the power switch located on the back of the
speaker to 'ON' position.
The blue indicator light will flash quickly. This indicates that the speaker is in pairing mode
and is searching for your Bluetooth device.
Make sure the Bluetooth function on your device is turned on.
Search the speaker named," SB‐01".
Once you have selected the speaker, your device will pair without a password. (If your device
prompts for a password, enter the password"0000".
Once your speaker is paired, the blue indicator light will begin to flash slower.
Start playing music on your device. Make sure that you keep your device within a 33 feet
range of your Bluetooth speaker.
Adjust the volume of your device to a comfortable level.
Turn off the unit when not in use.
Caution:
This is not a toy. Please keep away from children.
Please keep away from water / heat.
Low power may cause poor connection even no working of Bluetooth.
Do not overcharge the battery.
Battery pack shall not be exposed to excessive heat such as sunshine, fire or the like.
CQL1618-B
Instruction Manual (Read before proceeding)
Bluetooth Speaker