Assembly; Maintenance; Environment Protection - Sealey AP4804SS Quick Start Manual

4 drawer stainless steel mobile tool cabinet
Table of Contents

Advertisement

4. assembly

4.1.
fit hanDle
4.1.1.
Attach handle with 6mm x 12mm hex bolts, spring and flat washers.
4.2.
fit CasteRs
waRninG! Two or more people are required to lay down or stand up the cabinet. Do not stand in front or behind and lock drawers
whilst turning over.
4.2.1.
Carefully lay the cabinet upside down with a soft mat underneath for protection.
4.2.2.
Fit the two swivel/braked castors, on the handle side using 10mm x 25mm bolts, through each castor and into the bottom of the
cabinet. Tighten securely.
4.2.3.
Repeat for the two rigid casters on the other side.
4.3.
DRaweRs
4.3.1.
New drawers slides may be stiff and difficult to open at first. A gentle outward pull should release the safety catch that prevents the
drawer from opening whilst the cabinet is being moved.
4.3.2.
Remove drawers from their slides as below (pull left slide tab down and pull right side slide tab up).

5. maintenanCe

5.1.
To clean use a soft cloth that will not scratch the surface.
Do not use solvents of any kind they may damage the surface.
8
5.2.
Liquid spills should be removed immediately, use a soft clean cloth to blot the spill gently - avoid rubbing.
5.3.
Grease the casters with good quality grease once a year.
5.4.
lubricate the drawer slides twice a year with light duty oil.

enviRonment PRoteCtion

Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
important: no liability is accepted for incorrect use of this product.
warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
sealey Group, Kempson way, suffolk business Park, bury st edmunds, suffolk. iP32 7aR
01284 757500
© Jack Sealey limited
01284 703534
sales@sealey.co.uk
Original Language Version
www.sealey.co.uk
AP4804SS | Issue 1 - 29/05/19

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AP4804SS and is the answer not in the manual?

Table of Contents