Related Manuals for Socket Go Wi-Fi! P322
Summary of Contents for Socket Go Wi-Fi! P322
- Page 1 ® Go Wi-Fi! P322/P322X 802.11a/b/g WLAN SDIO Card User’s Guide ____________________________________________________________________________________________________________...
-
Page 2: Copyright Notice
Please refrain from any applications of the Socket Mobile product that are not described in the user manual. Please refrain from disassembling the Socket Go Wi-Fi! P322 and P322X SDIO cards. Disassembly will void the product warranty. -
Page 3: Table Of Contents
4. Connect to the Access Point ................10 5. Check IP Address after WLAN Connection..........11 6. Technical Support..................12 7. Limited Warranty ..................13 Limited Software Warranty ..............14 Disclaimer ....................14 8. Regulatory Compliance................16 English....................16 Français ....................17 Go Wi-Fi! P322/P322X User’s Guide © Socket Mobile, Inc. 3 of 18... -
Page 4: Introduction
1. Introduction Thank you for purchasing the Socket Go Wi-Fi! P322/P322X 802.11a/b/g SDIO WLAN card. This User’s Guide provides instructions for using the P322/P322X driver on ARMV4I processor based handheld devices running the Windows Mobile 5 or 6 operating system. -
Page 5: Installing The P322/P322X Driver
3. Use My Computer or Windows Explorer to access the CD-ROM drive or the local PC drive. 4. Click on the Socket_P322_x.x.x.x.exe (e.g.: Socket_P322_4.0.2.0.exe for the driver version 4.0.2.0). It will launch the InstallShield Wizard as below. Go Wi-Fi! P322/P322X User’s Guide © Socket Mobile, Inc. 5 of 18... - Page 6 5. Follow the InstallShield Wizard to complete the driver installation Go Wi-Fi! P322/P322X User’s Guide © Socket Mobile, Inc. 6 of 18...
-
Page 7: Create Access Point Profile
3. Create Access Point Profile 1. Insert the Go Wi-Fi! P322/P322X card into the SDIO slot of your device. Once the WLAN card is initialized and the driver is loaded, a radio tower icon shows up at the top bar. - Page 8 Click on the menu item “Connect”. If it is the first time connecting to this access point, it will create a new profile. Otherwise, it will start the WLAN connection Go Wi-Fi! P322/P322X User’s Guide © Socket Mobile, Inc. 8 of 18...
- Page 9 6. Next, select the authentication and encryption methods corresponding to the selected access point. Then, enter the right network key. Follow the “Next” soft key to move to the next screen until “Finish” to complete the profile creation. Go Wi-Fi! P322/P322X User’s Guide © Socket Mobile, Inc. 9 of 18...
-
Page 10: Connect To The Access Point
PDA starts to try connecting to the WLAN access point you selected. 2. The screen below shows that the device is connected to the access point. Go Wi-Fi! P322/P322X User’s Guide © Socket Mobile, Inc. 10 of 18... -
Page 11: Check Ip Address After Wlan Connection
You can check the IP address assigned to the device by going to the “Network Adapters” tab and select the “P322 WLAN SDIO” entry. You can check the network connectivity by pinging this IP address from a network computer. Go Wi-Fi! P322/P322X User’s Guide © Socket Mobile, Inc. 11 of 18... -
Page 12: Technical Support
6. Technical Support Socket has two technical support resources to help you. Please note that support is available only in English. Online Knowledge Base: Search for articles, Frequently Asked Questions or Hot Topics 24 hours a day. http://support.socketmobile.com/EU_S1a.asp Online Requests: Register your product and submit a question to our Technical Support team. -
Page 13: Limited Warranty
The returned product must be accompanied by a return material authorization (RMA) number issued by Socket or by a Socket Service Center. If you ship the product, you must use the original container or equivalent and you must pay the shipping charges to Socket. -
Page 14: Limited Software Warranty
SOFTWARE, even if Socket has been advised of the possibility of such damages. Because some states do not allow the exclusion or limitation of liability for consequential or incidental damages, the above limitation may not apply to you. - Page 15 LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Go Wi-Fi! P322/P322X User’s Guide © Socket Mobile, Inc. 15 of 18...
-
Page 16: Regulatory Compliance
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Go Wi-Fi! P322/P322X User’s Guide © Socket Mobile, Inc. 16 of 18... -
Page 17: Français
• Conforme aux Standards Emissions: CE SAR, Ecart : 1 cm Japan • TELEC STD-T33, STD-T66, STD-T71 (W52, W53, W56) Ce produit respecte la directive de l’EU 2002/95/EC relative à la restriction de l’utilisation de substances dangereuses (RoHS). Go Wi-Fi! P322/P322X User’s Guide © Socket Mobile, Inc. 17 of 18... - Page 18 être jeté dans une décharge municipale. Veuillez consulter la réglementation locale concernant la mise au rebut de produits électroniques. réglementation locale concernant la mise au rebut de produits électroniques. Go Wi-Fi! P322/P322X User’s Guide © Socket Mobile, Inc. 18 of 18...
Need help?
Do you have a question about the Go Wi-Fi! P322 and is the answer not in the manual?
Questions and answers