Panasonic Lumix DMC-TZ100 Operating Instructions Manual page 99

Taking pictures after automatically setting the aperture value and shutter speed (Programme AE Mode)
About Programme Shift
The function for maintaining the same exposure (brightness) while changing the shutter
speed and aperture value combination is called "Programme Shift". You can use
"Programme Shift" to take pictures by adjusting the shutter speed and aperture value
even in Programme AE Mode.
<Example of Programme Shift>
1 2
(Aperture value)
2.0
2.8
4.0
5.6
8.0
11
1
1/2
Programme Shift amount
Represents the aperture and shutter speed set automatically by the camera at each exposure
value.
Programme Shift diagram
Represents the range of the aperture and shutter speed combination you can change with
Programme Shift at each exposure value.
Programme Shift limit
Represents the range of the aperture and shutter speed you can select when you use
Programme Shift with the camera.
●
Programme Shift cannot be used in the following cases:
• When recording 4K photos
• When recording using [Post Focus]
• When ISO sensitivity is set to [
99
3 4 5 6 7
1/4 1/15 1/60
1/8 1/30
]
8 9 10 11 12
1/250 1/1000
1/125 1/500 1/2000
Recording mode
(EV)
13 14
15
16
17
18
19
20
(Shutter speed)
1/4000
SQW0550