Panasonic Lumix DMC-TZ100 Operating Instructions Manual page 224

■
About the automatic gain compensation setting
Select [Auto Gain] on the screen in step
single picture" (→223).
• [ON]: Combines several pictures into one by automatically adjusting the brightness in
accordance with the number of pictures taken.
• [OFF]: Combines several pictures into one by simply overlapping the exposure
results of all pictures, as is. Perform the Exposure Compensation based on
the requirements of a subject.
■
To overlay the pictures on the RAW file picture in a card
Set [Overlay] to [ON] on the screen in step
single picture" (→223). After selecting [Start], the pictures on a card will be displayed.
Select the RAW file pictures and press [MENU/SET] to continue recording.
• You can perform [Overlay] on RAW file pictures recorded using this camera only.
●
Pictures are not saved in memory until Multi Exposure is ended.
●
Information for the picture taken last will be used as recording information of pictures taken using
Multi Exposure.
●
While [Multi Exp.] recording is being performed, you cannot set items displayed in grey on the
menu screen.
●
This function is not available in the following cases:
• When using [Time Lapse Shot]
• When using [Stop Motion Animation]
224
Functions for specific subjects and purposes
Performing multiple exposures for a single picture [Multi Exp.]
2
of "Performing multiple exposures for a
2
of "Performing multiple exposures for a
TZ100/TZ101
SQW0550