Yamaha M2500 Owner's Manual page 18

When you change the setting of the GROUP/AUX
FLIP switch, numerous functions of the output chan-
nels of GROUP buses 1–8 and AUX buses 7–14 will
change in addition to the faders. The functions avail-
able for the output channels of each bus are shown
below for each setting (GROUP/AUX) of the
GROUP/AUX FLIP switch.
• GROUP/AUX FLIP switch= GROUP (principal application: main console)
Output channel
Master control
Channel assign switch
(MATRIX/ST/MONO/LCR)
PAN control
Mute switch
INSERT I/O
• GROUP/AUX FLIP switch= AUX (principal application: monitor console)
Output channel
Master control
Channel assign switch
(MATRIX/ST/MONO/LCR)
PAN control
Mute switch
INSERT I/O
Note: The output channels of AUX buses 1–6 are
not affected by the GROUP/AUX FLIP switch.
GROUP buses 1–8 AUX buses 1–6
100 mm faders 100 mm faders
ON/EDIT
GROUP buses 1–8 AUX buses 1–6
Rotary faders 100 mm faders
ON
AUX buses 7–14
Rotary faders
ON ON
AUX buses 7–14
100 mm faders
ON ON/EDIT
Control panel
M2500—Owner's Manual
15