Table of Contents
Advertisement
Appendix
PCM Downsampling
• Even when PCM Downsampling is set to Off, some discs will only output
• HDMI
BD-Live Internet Connection
• What is a valid certificate?
• The Internet connection may be restricted while you are using BD-LIVE
Settings
BD Data Management
• In the external memory mode, disc playback may be stopped if you disconnect
• Only those USB devices formatted in the FAT file system (DOS 8.3 volume
• The Resume Play function may not work after you format the storage device.
• The total memory available to BD Data Management may differ, depending on
Anynet+ (HDMI-CEC)
• Depending on your TV, certain HDMI output resolutions may not work. Please
• This function is not available if the HDMI cable does not support CEC.
• If your Samsung TV has an Anynet+ logo, then it supports the Anynet+
downsampled audio through the optical digital output.
- If your TV is not compatible with compressed multi-channel formats (Dolby
Digital, DTS), the product may output PCM 2ch downmixed audio even
though you selected Bitstream (either Reencoded or Unprocessed) in the
setup menu.
- If your TV is not compatible with PCM sampling rates over 48kHz, the
product will output at 48kHz.
When the product uses BD-LIVE to send the disc data and a request to the
server to certify the disc, the server uses the transmitted data to check if the
disc is valid and sends the certificate back to the product.
contents.
the USB device in the middle of playback.
label) are supported.
We recommend you use USB devices that support the USB 2.0 protocol with
4 MB/sec or faster read/write speed.
conditions.
refer to the user manual of your TV.
function.
50
English
Advertisement
Table of Contents
