Support; Networks And The Internet; Configuring Your Network Connection - Samsung UBD-K8500/ZA User Manual

Table of Contents



Remote Management
When activated, lets Samsung Call Center agents
diagnose and fix problems with your player
remotely. Requires an active Internet connection.
\ Remote Management service might not be
available in some countries.
\ To use Remote Management:
1) Call the Samsung Contact Center and ask
for remote support.
2) Open the player's menu on your TV and
go to the Support section.
3) Select Remote Management, and then
read and agree to the service agreements.
When the PIN screen appears, provide the
PIN number to the agent.
4) The agent accesses your player.
Software Update
This menu allows you to upgrade the product's
software for performance improvements or
additional services.
Contact Samsung
Provides contact information for assistance with
your product.
Resets all settings to their default settings except
for the network and Smart Hub settings, and then
starts the Setup function. To use, you must enter
the security PIN. The default security PIN is 0000.

Networks and the Internet

When you connect this product to a network,
you can use network based applications and
functions such as Smart Hub and BD-LIVE,
and upgrade the product's software through
the network connection. For more information
about accessing and using Internet services, see
the Network Services chapter of this manual on
pages 40~48. Instructions for configuring the
network connection start below.

Configuring Your Network Connection

Before you begin, determine if your IP address
is static or dynamic. (Most are dynamic.) If it
is dynamic, and you have a wired or wireless
network, we recommend using the Automatic
configuration procedures described below.
If you are connecting to a wired network, connect
the product to your router using a LAN cable
before you start the configuration procedure.
If you are connecting to a wireless network,
disconnect any wired network connections before
you begin.
To begin configuring your network connection,
follow these steps:
Wired Network
Wired - Automatic
1. In the Home screen, select Settings, and
then press the OK button.
2. Select Network, and then press the OK
3. Select Network Settings, and then press the
OK button.
4. Select Wired in the Network Settings screen,
and then press the OK button.
5. Select the Connect button, and then press
the OK button. The product detects the wired
connection, verifies the network connection,
and then connects to the network.


Table of Contents

Subscribe to Our Youtube Channel

This manual is also suitable for:


Table of Contents