Advertisement
Adjust the spring screw, located on the back side of the guitar body, so that the tail piece section of the tremolo
unit is parallel to the body.
If the string gauge or the position of the spring hook is changed, adjustment of the tremolo unit's angle (adjust-
ment of the amount of floating) will be necessary.
1.
Remove the four (4) cover fixing screws located on the back
side of the guitar body and remove the cover.
2.
Adjust the two (2) spring screws uniformly, so as to maintain
good balance, and adjust so that the tail section is parallel.
• If the tail section is raised
Turn the spring screw to the right (clockwise).
• If the tail section is lowered
Turn the spring screw to the left (counter-clockwise).
3.
Adjusting will affect string pitch so please check and tune the
strings after adjusting the tailpiece.
Angle Adjustment for the Tremolo Unit
Spring
Screws
Adjust equally.
Tail section
Adjust the height
uniformly
Springs
9
Advertisement
