Advertisement
4.10 SWITCHING ON THE APPLIANCE AND SELECTING THE WASHING PROGRAMME
To switch on the appliance and select the programme, proceed as follows:
1.
Turn the programmes knob in either direction. This switches on the washing machine.
2.
Select the washing programme. The time left to the end of the programme on the dis-
play. The symbols on the display light up to identify the information shown.
3.
The default spin speed values are shown. The initial settings can be modified using the
button underneath the sequence of spin speeds. And temperatures
4.
If spin speed
the tank full. If this value is set the appliance does not perform the final spin and the
washing programme ends with water in the tank.
Spin Speed selection
Temperatures selection
is set, there will be no spin cycle and the appliance will stop with
EN
Time to end
17
Advertisement
