Acer B248Y User Manual page 29

6. Refresh rate num: Display the panel's current refresh rate on the screen.
-----------------------------------------------------------------------------------------------------------
Note: If AdaptiveSync set "On" you can see the V Frequency to changes in the OSD.
7. Ultra-Low Latency: Set to On to speed up the processing time of the display.
-----------------------------------------------------------------------------------------------------------
Note: AdaptiveSync is On, the Ultra-Low Latency automatic set to On and Ultra-low
latency is not supported at resolutions below 800x600.
OSD
Picture Language
Color
OSD Timeout
Audio
Transparency
Pertormance OSD Lock
OSD
System
Save Settings to...
Move Enter
1. Press the MENU key to open the OSD.
2. Toggle the joystick to the up or down to select OSD from the OSD.Then toggle to the
right to navigate to the element you wish to adjust and press the joystick to enter it.
3. Toggle to the left or right to adjust the sliding scales.
4. Language: Set the OSD menu language.
5. OSD timeout: Adjust the delay before turning off the OSD menu.
6. Transparency: Select the transparency when using gaming mode. The transparency
can be 0% (OFF), 20%, 40%, 60%, or 80%.
7. OSD Lock:To choose OSD lock
Mode - Standard
English
Off
Off
Exit
on/off.
120
X