Acer B248Y User Manual page 27
Hide thumbs
Also See for B248Y:
- Quick start manual (2 pages) ,
- Manual (29 pages) ,
- User manual (34 pages)
Table of Contents
Advertisement
•
CIE 1931 positive and negative error of 0.05, ("HDR" according to current Panel
to fine-tune).
•
Color Space = HDR, the Modes = HDR, Picture page HDR = Auto.
•
Modes = (Action/Racing/Sports/User/Standard/ECO/Graphics) is selected; the
color space is auto set to "General".
•
Color Space = (sRGB/Rec.709/HDR/EBU/DCI/SMPTE-C), If to adjust the
parameter the Modes will not jump to User mode, but the Color Space =
"General" except.
•
Color Space = (sRGB/Rec.709/HDR/EBU/DCI/SMPTE-C), 6-Axis Hue &
Saturate is gray out and unavailable.
•
Color Space = (sRGB/Rec.709/HDR/EBU/DCI/SMPTE-C), Grayscale Mode is
gray out and unavailable.
•
Color Space = (sRGB/Rec.709/HDR/EBU/DCI/SMPTE-C), (Light & Color)
Sensor are gray out and unavailable.
•
8.
ColorSense: Automatically adjust color temperature smoothly.
-----------------------------------------------------------------------------------------------------------
Note:
•
ColorSense is On, Factory Menu can check the CT (Color Temp) Value.
•
Mode = HDR, does not support the ColorSense.
•
Color Space = (sRGB/Rec.709/HDR/EBU/DCI/SMPTE-C), does not support
the ColorSense.
•
ColorSense is on, the Modes is User, the (Contrast, Color Temp, Low Blue
Light, 6 axis Hue, 6 axis Saturate, Grayscale Mode) functions are gray out
and unavailable.
9.
Grayscale Mode:To choose Grayscale mode.
10. 6-axis Hue: Adjust the red, green, blue, yellow, magenta and cyan hue.
11. 6-axis
Saturate: Adjust the red, green, blue, yellow, magenta and cyan saturation.
Advertisement
Table of Contents
