Table of Contents
Advertisement
11.4 Modifying the display options
Handset display
in standby mode
RADIO LINK
HANDSET
ACCESS
Setting
Menu
possible
NAME
ACCESS 1
KEYPAD 1
KEYPAD 2
Factory:
• ACCESS 1 for
1st access,
ACCESS 2 for
2nd, etc.
• KEYPAD 1 for
1st key,
KEYPAD 2
for 2nd, etc.,
as described in
the table on the
next page
BACK-
ON ACTION
LIGHTING
NIGHT MODE
ACTIVE
TAGS
PIN
DISPLAY
SOUNDS
PARAMETERS
PULSE
INFOS
Can be used to modify a name given to an access
or to a call button (8 characters max.).
1. Select the name to be modified
2. Modify the 1
st
character
using the keys
TIP: press and hold the keys
to quickly scroll through the characters.
3. Move on to the next character
using the key
The
key selects the previous character.
4. Perform steps 2 and 3 for all the characters and then, once
the desired name has been programmed, press
IMPORTANT: the KEYPAD 1/KEYPAD 2 menu is only displayed if the 2
outdoor caller unit call buttons have been programmed to be
recognised by the same handset.
Can be used to define the outdoor caller unit backlighting
operating mode.
If the controller is connected to an external power supply, you
can select the following depending on the type of outdoor caller unit:
MHF03X / MHF04X
MHF05X / MHF06X units
ACTIVE
ON ACTION
IMPORTANT: if a power cut occurs and the controller has battery back-
up, backlighting is activated when a button is pressed or a badge used.
26
NAME
BACKLIGHTING
Using the setting
.
.
MHF01X
MHF02X units
ACTIVE
Backlighting is activated 24 hours/day
NIGHT MODE
Backlighting is activated at night time
ON ACTION
Backlighting is activated when a button
is pressed or a tag used
C
C
.
Advertisement
Table of Contents
