Table of Contents
Advertisement
DMR
- If you want to use DMR(digital media renderer), you must select 'Yes' in this item.
Bluetooth Sound Sync
- Bluetooth Sound Sync enables Bluetooth sound from the mobile device of player. If this value is enabled, phone can pair to TV and user can
hear the sound of player through the TV.
- Supported device : Mobile device based on Android (higher than v4.4 Kitkat) / iOS
* Support the lower than v4.4 (Kitkat) on the LG mobile device based on Android
- Supported version : Higher than Bluetooth 3.0
DIAL
- With this DIAL service, you can launch the target app at Smart Home Launcher bar without select the target app by remote controller. The
target app should be already selected at Installer Menu > General > Preloaded App.
TV Name
- When other media device(ex: smart phone, desktop, laptop) searching TV, this string was displayed.
SoftAP
- If you want to use SoftAp menu on MEDIA SHARE menu, you must select 'Yes' in this item.
A SoftAP is a function of TV which is used like Access Point.
Use Default
- If you want to use default password(this password was generated randomly), you must select 'yes' in this item.
Security Key
- When guests want to use TV's SoftAP function, they need this password. If you want to change this default password, you need to Change 'Use
Default Setting' value into 'NO' .
Wi-Fi Signal Strength
- You can control wireless signal strength on SoftAP mode. This is controlled by 5 step. If you select 'Not Used' , wireless signal strength will be
set to Max value.
Wi-Fi Channel
- You can control wireless channel on SoftAP mode. This is controlled from 1 to 11 channel. If you select 'Auto' , wireless channel of SoftAP will
be set to random channel.
31
INSTALLATION MENU
Advertisement
Table of Contents
