Install Driver; Join A Wireless Network; Uninstall Driver - TP-Link Archer T4U Plus User Manual

Chapter 3
3 1

Install Driver

1 Insert the resource CD into your CD drive and run the
pop-up Autoplay window.
Note:
1. You can also download the driver or check the new release at
https://www tp-link com/download-center.
2. In some operating systems, the CD screen will pop up automatically. Otherwise, run the CD manually.
2 Select Archer T4U Plus
installation.
Note:
1. For Windows 7, if the message "Windows can't verify the publisher of this driver software" pops
up, click Install this driver software anyway.
2. If you can't install the driver successfully, disable the antivirus software and firewall, then try again.
3 2

Join a Wireless Network

You can join a wireless network via Windows built-in wireless utility. Follow the
instructions below to use your computer system's built-in wireless utility:
1. Click , or
want to join, and click Connect. Enter the network password when prompted.
2. When the network icon changes to
connection.
3 3

Uninstall Driver

The software uninstallation steps vary a bit from different systems. Please follow
the appropriate instructions for your Windows operating system:
8/8.1/10, Windows
• Windows 8/8 1/10
Go to Start menu to find the TP-Link application. Click
T4U Plus Driver, then follow the on-screen instructions to complete the
uninstallation.
• Windows XP/7
Go to Start > All Programs
Follow the on-screen instructions to complete the uninstallation.
and follow the instructions to complete the
(Network icon) on the taskbar. Select the Wi-Fi network you
XP/7.
> TP-Link >
or , it indicates a successful network
Uninstall TP-Link Archer
Uninstall TP-Link Archer T4U Plus
Windows
Autorun.exe from the
Windows
Driver.
7