Related Manuals for LG 88BH7D-B.AHK
Summary of Contents for LG 88BH7D-B.AHK
- Page 1 OWNER’S MANUAL LG Digital Signage (MONITOR SIGNAGE) Please read this manual carefully before operating your set and retain it for future reference. 88BH7D www.lg.com Copyright © 2017 LG Electronics Inc. All Rights Reserved.
-
Page 2: Table Of Contents
TABLE OF CONTENTS SAFETY PRECAUTION ....3 - Precautions In Installing the Product .....3 - Precautions to the AC Adapter and Electrical Power ..................5 - Precautions In Moving the Product ......7 - Precautions In Using the Product ......7 - Mounting on a Wall ............8 LICENSES ........9 ASSEMBLY AND PREPARATION ...... -
Page 3: Safety Precaution
SAFETY PRECAUTION Please read these safety precautions carefully before using the product. WARNING If you ignore the warning message, you may be seriously injured or there is a possibility of accident or death. CAUTION If you ignore the caution message, you may be slightly injured or the product may be damaged. WARNING •... - Page 4 If you install the product in a place that does not meet the recommended conditions, this may cause serious damage to the product’s picture quality, life cycle, and appearance. Please check with LG or a qualified installer before installing. This caution applies to a place where there is an abundance of fine dust or oil mist, chemical substances are used, the temperature is very high or low, the humidity is very high, or the product is likely to remain turned on for a long period of time (airport and train station).
-
Page 5: Precautions To The Ac Adapter And Electrical Power
- If loosely connected, the poor connection may cause a fire or electric shock. • Be sure to use power cords and AC adapters provided or approved by LG Electronics, Inc. - The use of non-approved products may cause a fire or electric shock. - Page 6 • If you don’t intend to use the product for a long time, unplug the power cable from the product. - Covering dust can cause a fire, or insulation deterioration can cause electric leakage, electric shock or fire. • Fix the power cable completely. - If the power cable is not fixed completely, a fire can break out.
-
Page 7: Precautions In Moving The Product
Precautions In Moving the Product WARNING • Make sure to turn off the product. - You may be electrocuted or the product can be damaged. • Make sure to remove all cables before moving the product. - You may be electrocuted or the product can be damaged. •... -
Page 8: Mounting On A Wall
CAUTION • Do not put or store inflammable substances near the product. - There is a danger of explosion or fire due to careless handling of the inflammable substances. • When cleaning the product, unplug the power cord and scrub gently with a soft cloth to prevent scratching. Do not clean with a wet cloth or spray water or other liquids directly onto the product. -
Page 9: Licenses
LICENSES Supported licenses may differ by model. For more information of the licenses, visit www.lg.com. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. - Page 10 For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol together, DTS 2.0 Channel, DTS 2.0+Digital Out, DTS-HD, and DTS Virtual:X are registered trademarks or trademarks of DTS, Inc. in the United States and/or other countries. © DTS, Inc. All Rights Reserved.
-
Page 11: Assembly And Preparation
SuperSign Software & Manual - Downloading from the LG Electronics website. - Visit the LG Electronics website (http://partner.lge.com) and download the latest software for your model. • The warranty will not cover any damage caused by using the product in an excessively dusty environment. -
Page 12: Optional Accessories
Optional Accessories Without prior notice, optional accessories are subject to change to improve the performance of the product, and new accessories may be added. The illustrations in this manual may differ from the actual product and accessories. Media Player kit Media Player Screws CD (Owner’s Manual) / Cards... - Page 13 Pixel sensor kit Wi-Fi Dongle kit KT-SP0 AN-WF500 NOTE • Cable holder/cable tie may not be available in some areas or for some models. • Optional accessories are available for some models. If necessary, please purchase them separately. • Pixel sensor is sold separately. You can obtain additional accessories from your local retail store. •...
-
Page 14: Parts And Buttons
Parts and Buttons The image may be different according to the model. Buttons • INPUT: Changes the input source. • MENU: Accesses the main menus, or saves your input and exits the menus. • : Adjust the up and down. •... -
Page 15: Portrait Layout
Portrait Layout When installing in a portrait layout, rotate the monitor counterclockwise 90 degrees (when facing the screen). Removing Protective Plastic Film from Sides before Installation Make sure that the protective plastic film is removed from each corner before installing the product. - Page 16 Using Kensington Lock (This is not available for all models.) The Kensington security system connector is located at the back of the monitor. For more information on installation and use of this system, refer to the manual provided with the Kensington security system or visit http://www. kensington.com.
-
Page 17: Installing On A Wall
Screws which are longer than standard length may damage the inside of the monitor. A non-VESA standard screw may damage the product and cause the monitor to fall. LG Electronics is not liable for any accidents related to the use of non-standard screws. - Page 18 Securing the monitor to a wall (optional) (Procedure may differ depending on the model.) Insert and tighten the eyebolts, or brackets and bolts on the back of the monitor. - If there are already bolts inserted in the eyebolts’ position, remove the other bolts first. Mount the wall brackets with the bolts to the wall.
-
Page 19: Remote Control
REMOTE CONTROL The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully to use the monitor correctly. To install batteries, open the battery cover, place batteries (1.5 V AAA) matching terminals to the labels inside the compartment, and close the battery cover. - Page 20 Selects the Picture Mode. Activates the Launcher. Enters the White Balance menu. Accesses the main menus or saves your input and exit menus. SuperSign menu key Navigation Buttons Scrolls through menus or options. Selects menus or options and confirms your input. Allows you to move back one step in the user interaction function.
-
Page 21: Making Connections
MAKING CONNECTIONS You can connect various external devices to your monitor. Change the input mode and select the external device you want to connect. For more information about external device connections, see the user manual provided with each device. Connecting to a PC Some of the cables are not provided. - Page 22 NOTE • For the best image quality, using the monitor with HDMI connection is recommended. • To comply with the standard specifications of the product, make sure to use a shielded interface cable made with a ferrite core for the DisplayPort cable and DVI-D/HDMI cable. •...
-
Page 23: Connecting Multiple Monitors
Connecting Multiple Monitors To use multiple monitors connected to each other, connect the end of the signal input cable (DP cable) to the DP OUT connection in one monitor and connect the other end to the DP IN connection of the other monitor. * DP Cable: Use a DP cable that is certified to a DP 1.1a (SST) standard or higher. -
Page 24: Using The Input List
Using the Input List HOME • HDMI1 • HDMI2 • OPS/HDMI3/DVI-D • DISPLAYPORT... -
Page 25: Troubleshooting
TROUBLESHOOTING No image is displayed. Problem Action Is the product power cord connected? • Check if the power cord is correctly plugged into the power outlet. Does the “Invalid Format” message • The signal from the PC (graphics card) is out of the vertical or appear? horizontal frequency range of the product. - Page 26 After-image appears on the product. Problem Action After-image appears when the product is • If you use a fixed image for a long time, the pixels may be damaged. turned off. Use the screen-saver function. • When a dark image is displayed on the screen after an image with high contrast (black and white or gray), this may cause image sticking.
- Page 27 CAUTION • Image sticking does not occur when using constantly changing images but may occur when using a fixed image for an extended period of time. Therefore, it is recommended that you use the instructions below to decrease the likelihood of image sticking occurring when using a fixed image.
-
Page 28: Product Specifications
PRODUCT SPECIFICATIONS The product specifications below may be changed without prior notice due to upgrade of product functions. LCD screen Screen type Thin Film Transistor (TFT) Liquid Crystal Display (LCD) Screen Video signal Maximum resolution HDMI1 / HDMI2: 3840 x 1080 @ 60 Hz HDMI3 / DisplayPort: 3840 x 2160 @ 30 Hz OPS / DVI-D : 3840 x 1080 @ 30Hz - This may not be supported on some OS or graphic card types. - Page 29 88BH7D LCD screen Pixel pitch 0.1865 mm (H) x 0.554 mm (V) Power Rated power AC 100-240 V~ 50/60 Hz 5.5 A Power consumption On Mode: 400 W (Typ.) Sleep Mode (DVI-D, HDMI1/2/3, DisplayPort): ≤ 0.5 W Off Mode: ≤ 0.5 W Dimensions (Width 2158.3 mm x 611.2 mm x 103.9 mm / 34.2 kg x Height x Depth) /...
- Page 30 HDMI1,2,3 / DVI-D / DisplayPort / OPS (PC) Support Mode Horizontal frequency Resolution Vertical frequency (Hz) Remark (kHz) 800 x 600 37.879 60.317 1024 x 768 48.363 60.0 1280 x 720 44.772 59.855 1280 x 1024 63.981 60.02 1920 x 1080 67.5 3840 x 1080 33.003...
- Page 31 Multi-screen (PC) Support Mode Horizontal frequency Resolution Vertical frequency (Hz) Remark (kHz) 1920 x 1080 33.009 29.954 Multi-screen (DTV) Support Mode Horizontal frequency Resolution Vertical frequency (Hz) Remark (kHz) 720/25P 18.75 HDTV 720p 720/30P 22.5 HDTV 720p 1080/25P 28.125 HDTV 1080P 25Hz 1080/30P 33.750 HDTV 1080P 30Hz...
- Page 32 This equipment is compliant with Class A of WARNING - Make sure to read the Safety Precautions before using CISPR 32. In a residential environment this equipment may the product. cause radio interference. The model and serial numbers of the SET are located on the back and one side of the SET.