Dell E75S Series Installation And Service Manual page 87

Figure 82. Installing the BOSS S2 module
5. Connect the BOSS power cable to the PIB and the BOSS signal cable to the motherboard.
Figure 83. Connecting the BOSS power cable and signal cable
6. Align the M.2 SSD at an angle with the BOSS S2 card carrier.
7. Insert the M.2 SSD until it is firmly seated in the BOSS S2 card carrier.
8. Using the Phillips #1 screwdriver, secure the M.2 SSD on the BOSS S2 card carrier with the M3 x 0.5 x 4.5 mm screw.
Installing and removing system components 87