Table of Contents
Advertisement
2. Move the plastic connection out and
drain the water into a basin or
equivalent receptacle.
3. Move plastic connection in and install
water container.
4. To continue the programme press
the
Start/Pause button.
11.3 Cleaning the heat
exchanger
Condenser flashes, do
If the indicator
the inspection of the heat exchanger and
its compartment. If there is a dirt, clean
it.
To do the inspection:
1. Open the door. Pull the filter.
2. Move the release button on the
bottom of the door to open the heat
exchanger door.
3. Turn the blockage to unlock the heat
exchanger cover.
4. Lower the heat exchanger cover.
5. If necessary, remove the fluff from
the heat exchanger and its
compartment. You can use wet cloth
and/or a vacuum cleaner with the
brush.
ENGLISH
19
Advertisement
Table of Contents
