Frigidaire FFAD5033R1 Use & Care Manual page 6

Operating Instructions
Operating Instructions
(continued)
7. To shut the unit down, press the ON/OFF button.
NOTE:
After a power outage, the unit will memorize the last setting and return the unit to the same setting once
power is restored.
Fault Codes
1. If the display reads "F1", "F2", "L1" or "H3" error codes, please turn off and unplug the unit, then plug it in again
in 30 minutes. If the unit malfunctions again, please contact your Authorized Frigidaire Service Center.
2.If the display reads "F0" , check the
surrounding temperature should be with in the range of 41 °F (5 °C) to 90 °F (32 °C). Unplug the unit and plug it in
again under normal operating conditions. If the "F0" code persists, contact your Authorized Frigidaire Service Center.
2 0 0 9 E e l t c o r
6
following
u l x H o m e P o r d u t c , s n I . c
F1
operating conditions. Outlet voltage should be 115V±10% and the
F0
l A r l g i h s t r s e r e e v . d