Troubleshooting - Philips BDP5650/93 User Manual

Table of Contents

Advertisement

Laser Specification
Laser Type (Diode): AlGaInN (BD),
AlGaInP (DVD/CD)
Wave length: 405+7nm/-7nm (BD),
660+10nm/-10nm (DVD),
785+10/-10nm (CD)
Output power: 1mW (BD),
0.26mW (DVD), 0.3mW (CD)
Operating Temperature & Humidity
0°C to 45°C, 5% to 90% Humidity for all
climates.
Storage Temperature & Humidity
-40 °C to 70 °C, 5% to 95%

5 Troubleshooting

Note
For identification and supply ratings, see
the type plate at the back or bottom of
the product.
Before you make or change any
connections, make sure that all devices are
disconnected from the power outlet.
Warning
Risk of electric shock. Never remove the
casing of the player.
To keep the warranty valid, never try to repair
the player yourself.
If you have problems using this player,
check the following points before you
request service. If you still have a problem,
register your player and get support at
www.philips.com/support.
If you contact Philips, you will be asked for the
model and serial number of this player. The
model number and serial number are on the
back of this player. Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Main unit
The buttons on this player do not work.
Disconnect this player from the power
supply for a few minutes, and then
reconnect.
Picture
No picture.
Make sure that the TV is switched to the
correct source input for this player.
EN
15

Advertisement

Table of Contents
loading

Table of Contents