Important Information; Graphical Symbols For Use On Equipment And Their Descriptions; About This System; For Your Safety - Panasonic KX-HN4001 Operating Instructions Manual

Graphical symbols for use on equipment and their
descriptions
Symbol

About this system

R This system is not designed to provide complete
protection from property loss. To the maximum
extent permitted by applicable law, Panasonic
will not be held responsible for any damage
incurred as a result of property loss.
R This product should not be used as substitute for
a medical or caregiver's supervision. It is the
caregiver's responsibility to stay close enough to
handle any eventuality.
R The system's wireless features are subject to
interference, therefore functionality in all
situations cannot be guaranteed.
Panasonic will not be held responsible for injury
or damage to property that occurs in the event of
wireless communication error or failure.
R If a power failure occurs or the power is
disconnected, the temperature will not be
accurate for up to an hour.

For your safety

To prevent severe injury and loss of life/
property, read this section carefully before
using the product to ensure proper and safe
operation of your product.
For assistance, please visit http://shop.panasonic.com/support
Explanation
Alternating current (A.C.)
Direct current (D.C.)
For indoor use only

Important Information

Symbol Explanation
Class P equipment
(equipment in which
protection against electric
shock relies on Double
Insulation or Reinforced
Insulation)
Stand-by (power)
WARNING
Power connection
R Use only the power source marked on the
product.
R Do not overload power outlets and
extension cords. This can result in the risk
of fire or electric shock.
R Completely insert the AC adaptor/power
plug into the power outlet. Failure to do so
may cause electric shock and/or excessive
heat resulting in a fire.
R Regularly remove any dust, etc. from the
AC adaptor/power plug by pulling it from
the power outlet, then wiping with a dry
cloth. Accumulated dust may cause an
insulation defect from moisture, etc.
resulting in a fire.
R Unplug the product from power outlets if it
emits smoke, an abnormal smell, or makes
an unusual noise. These conditions can
cause fire or electric shock. Confirm that
smoke has stopped emitting and contact us
at http://shop.panasonic.com/support
R Unplug from power outlets and never touch
the inside of the product if its casing has
been broken open. Danger of electric shock
exists.
R Never touch the plug with wet hands.
Danger of electric shock exists.
R Do not connect non-specified devices.
5