Sensors - Panasonic KX-HN4001 Operating Instructions Manual

Programming
5
MOKN a MMENUN repeatedly to exit.
Note:
R If the monitor unit is turned off while
selecting lullabies, the lullaby will continue
to play from the camera unit for the
specified time.
Configuring the sound detection level
You can adjust the level at which sound is
detected. Increase or decrease the detection
level needed to trigger the sound sensor.
1
MMENUN
2
MbN: "Auto Lullaby" a MOKN
3
MbN: "Sound Detect Level"
4
MbN: Select the desired setting. a MOKN
a MMENUN repeatedly to exit.
*1 This feature can only be selected when a
lullaby is selected for "Sound List"
(page 25).
Configuring the detection time
You can specify how long the sound sensor
continually detects sound before the camera
unit automatically plays a lullaby.
1
MMENUN
2
MbN: "Auto Lullaby" a MOKN
3
MbN: "Detection Time"
4
MbN: Select the desired setting. a MOKN
a MMENUN repeatedly to exit.
*1 This feature can only be selected when a
lullaby is selected for "Sound List"
(page 25).
Configuring the play time
You can specify how long the camera unit
plays lullabies when sound is detected.
1
MMENUN
2
MbN: "Auto Lullaby" a MOKN
3
MbN: "Play Time"
4
MbN: Select the desired setting. a MOKN
a MMENUN repeatedly to exit.
*1 This feature can only be selected when a
lullaby is selected for "Sound List"
(page 25).
For assistance, please visit http://shop.panasonic.com/support
26
*1
a MOKN
*1
a MOKN
*1
a MOKN

Sensors

You can configure the sensors to match how
you want the motion and sound to be
detected. The sensor configurations will also
affect how the auto lullaby and smart
notification features operate.
Configuring the motion sensor
You can specify the sensitivity of the motion
sensor, and also which areas of images are
used to detect motion.
Configuring the motion sensor
sensitivity
Motion sensor sensitivity is configured using a
combination of the following.
– the distance from the camera unit to your
baby
– the age of your baby in months
Change the settings in accordance with the
growth of your baby.
1
MMENUN
2
MbN: "Sensor Settings" a MOKN
3
MbN: "Motion Sensor" a MOKN
4
MbN: "Sensitivity" a MOKN
R A message is displayed. Press MOKN
to continue.
5
MbN: Select the desired setting. a MOKN
a MMENUN repeatedly to exit.
Configuring the motion sensor
detection area
1
MMENUN
2
MbN: "Sensor Settings" a MOKN
3
MbN: "Motion Sensor" a MOKN
4
MbN: "Set Detection Area" a MOKN
R An operation guide is displayed. Press
MOKN to continue.
5
Press MCN, MDN, MFN, or MEN to select a
cell to disable detection for. a MOKN
R Repeat for each cell to be disabled.