Table of Contents
Advertisement
Refrigerator/Selectable Zone/Freezer Compartment
Instructions for disassembly or assembly
1. Slowly lift the front of the vacuum case to detach the core
of the door of the vacuum case.
Aluminum Tray
Core
3. Install all parts by following the reverse steps of the disassembly procedure.
CAUTION
●
Please remove placed food from the vacuum box before disassembled.
●
Please do not detach any part other than the one described in the instruction.
●
If you want to disssemble any part not described in the instruction for cleaning, please consult the Service Center through the consultancy channels.
●
As for the disassembly or installation of any part, please open the door of the refrigerator wider than 90 degrees.
4
How to remove part
■
To remove Ice Bank, pull Upper Freezer Drawer all the way out,
then lift Ice Bank upward.
Upper Freezer Drawer
Adjustable-height the Shelves
■
The height of these shelves can be adjusted to match the height of your food and the
way in which they are to be used.
●
Remove all food stored on the shelf.
●
Lift the back of the shelf upward slightly then pull the shelf out towards to you.
●
Adjust the shelf to the desired height, then push the shelf in until it reaches the
back of the slot.
Shelf Trim
22
Vacuum case
Ice Bank
Ice Bank
Rail Stops
2
1
CAUTION
Shelf trims are removable, Holding the
shelf with both hands. DO NOT holding
trim or holding shelf with only one
hand otherwise it may drop or injury.
2. Lift the vacuum case higher.
Vegetable Drawer/Dry-Vegetable Drawer
To remove Vegetable Drawer and Dry-Vegetable Drawer, pull it all
■
the way out, then lift it upward.
■
To remove Utility Drawer, pull it all the way out, then
lift it upward.
Gently tap the left and right of the bottom surface while
■
pulling a pocket up to remove it. When installing the
pockets, push it all the way down in a smooth,
controlled manner.
Utility Drawer
Door Pocket
Advertisement
Table of Contents
