Table of Contents
Advertisement
Connect to the smartphone
8
Set the names of the unit and user in the application
and complete the pairing setup.
Move back to the application and wait for a while until pairing setting is finished. When finished, set the names of the unit and user,
and complete the setting.
●
If the pairing setup fails
1. Make sure that the wireless LAN password, which was entered in 4 , is correct
2. Make sure that the smartphone and its OS is targeted model
3. Make sure that the wireless LAN router's communication standard corresponds to IEEE.802.11b/g/n (2.4 GHz only). It does not correspond 5 GHz.
4. 4 Check whether the smartphone is connected to the 5 GHz SSID or wireless LAN router.
5. Set the unit, smartphone and wireless LAN router close to each other.
6. Only one pairing can be set at one time. Set them one by one.
7. One unit can be connect to only 5 smart phone devices.
8. The following devices may be affected by radio waves, and this product may not be able to communicate with the smartphone temporarily.
・ Microwave oven during heating
・ Other wireless LAN devices
・ Bluetooth device etc.
How to other Wireless LAN feature
●
Set wireless LAN feature to "None"
●
Delete all registration information (initialization)
1
10
on the unit changes from blinking to lighting
Press
2 second
WLAN lamp light is off.
1,2 Second
PiPi!
Press
2 second
WLAN lamp light is on.
1,2 Second
Peep!
Operate the application
Set the names of the unit
R-WB640VFX
Enter the name within 16 characters.
Half-width symbols, such as " * " , " / "
and " ( " , cannot be used.
Tap "Exit" to complete
the setting
・
If the wireless LAN feature is set at "No" , functions that can be
operated with a smartphone cannot be used.(>>P.11)
・ The registered information of the paired smartphone is not deleted.
・ When using the wireless LAN function again, it is not necessary to
rep-do the pairing settings.
2
and user
Press
and
2 second together for delete
all registation information.
1,2 Second
Peep!
Advertisement
Table of Contents
