LG SIGNATURE OLED77G7 Series Manual

LG SIGNATURE OLED77G7 Series Manual

Hide thumbs Also See for SIGNATURE OLED77G7 Series:

Advertisement

Quick Links

: Depending on model / Abhängig vom Modell / Selon le modèle / In base al modello / En función del modelo / Dependendo do modelo / Afhankelijk van het model /
Ανάλογα με το μοντέλο / Odvisno od modela / Típusfüggő / Zależnie od modelu / Závisí na modelu / V závislosti od modelu / În funcţie de model / В зависимост
от модела / Sõltub mudelist / Priklauso nuo modelio / Atkarībā no modeļa / U zavisnosti od modela / Ovisno o modelu / Në varësi të modelit / Ovisno o modelu /
Во зависност од моделот / Beroende på modell / Avhengig av modell / Afhængigt af modellen / Mallin mukaan /
www.lg.com
AA
CR2032
b
OLED65G7*
a
X 4
(M10 X L70)
OLED77G7*
C
X 18
X 2
(M4 X L12)
X 2
X 2
(M4 X L10)
X 2
X 2
(M8 X L77)
P/No: MFL69649042 (1701-REV00)
OLED TV
OLED65G7*
OLED77G7*
X 2
(M8 X L25)
Printed in Korea

Advertisement

Table of Contents
loading

Summary of Contents for LG SIGNATURE OLED77G7 Series

  • Page 1 от модела / Sõltub mudelist / Priklauso nuo modelio / Atkarībā no modeļa / U zavisnosti od modela / Ovisno o modelu / Në varësi të modelit / Ovisno o modelu / Во зависност од моделот / Beroende på modell / Avhengig av modell / Afhængigt af modellen / Mallin mukaan / P/No: MFL69649042 (1701-REV00) www.lg.com Printed in Korea...
  • Page 4 OLED65G7* 5 mm...
  • Page 5 OLED77G7*...
  • Page 6 OLED77G7*...
  • Page 7 ANTENNA / CABLE IN HDMI IN HDMI IN/ARC USB IN AUDIO OUT/ H/P OUT...
  • Page 8 AUDIO OUT/ H/P OUT Satellite IN OPTICAL DIGITAL AUDIO OUT...
  • Page 9 AV IN COMPONENT IN VIDEO L/MONO AUDIO R AUDIO VIDEO...
  • Page 12 1461 31.7 OLED65G7V-Z 1734 1055 1067 54.1 OLED77G7V-Z AC 100-240 V ~ 50 / 60 Hz Power requirement...
  • Page 13 Safety and Reference Please read this manual carefully before operating your set and retain it for future reference. www.lg.com *MFL69727247* P/NO : MFL69727247 (1704-REV01) Printed in Korea...
  • Page 14 Warning! Safety instructions • Do not touch the power plug with wet hands. Additionally, if the cord pin is wet or covered with dust, dry the power plug completely or wipe dust off. You may be electrocuted due to excess moisture. •...
  • Page 15 • Only use an authorized AC adapter and power cord approved by a danger of combustion/explosion or fire due to careless handling of LG Electronics. Otherwise, this may result in fire, electric shock, the inflammable substances. malfunction or product deformation.
  • Page 16 • Signal from Remote Control can be interrupted due to external/ • As long as this unit is connected to the AC wall outlet, it is not internal lighting eg Sunlight, fluorescent lighting. If this occurs turn disconnected from the AC power source even if you turn off this unit off lighting or darken viewing area.
  • Page 17 Preparing • When supported cable is not long enough to connect TV set with Companion Box (AV Box), you can use an extension cable. (Only OLED65/77W7V) • If the TV is turned on for the first time after it was shipped from the •...
  • Page 18: Lifting And Moving The Tv

    Lifting and moving the TV • Avoid touching the screen at all times, as this may result in damage to the screen. • Do not move the TV by holding the cable holders, as Please note the following advice to prevent the TV from being scratched the cable holders may break, and injuries and damage or damaged and for safe transportation regardless of its type and size.
  • Page 19: Mounting On A Table

    Securing the TV to a wall Basic functions (This feature is not available for all models.) Power On (Press) Power Off (Press and hold) Volume Control Programmes Control 1 All running apps will close, and any recording in progress will stop. 1 Insert and tighten the eye-bolts, or TV brackets and bolts on the Adjusting the menu back of the TV.
  • Page 20: Mounting On A Wall

    (Only when the item of the following form is provided) performed by a qualified professional installer. We recommend the use of LG’s wall mount bracket. LG’s wall mount bracket is easy to move with Provided item cables connected. When you do not use LG’s wall mount bracket, please use a wall mount bracket where the device is adequately secured to the wall with enough space to allow connectivity to external devices.
  • Page 21: Tools You Will Need

    • Check the material of the wall and the thickness of the finishing. Provided item • Use the Wall mount anchor for wall material of concrete, light concrete, strong natural stone, soft natural stone masonry brick and hallow block that do not crack. Wall Material Tools Wall Width...
  • Page 22: How To Attach To Masonry Walls

    How to attach to masonry walls • Make sure that children do not climb on or hang on Please follow the below direction. the TV. • Use a platform or cabinet that is strong and large 1 Use a drill bit Ø 8 mm to drill a hole for the anchor location within a enough to support the TV securely.
  • Page 23: Antenna Connection

    Using the kensington security Antenna connection system Connect the TV to a wall antenna socket with an RF cable (75 Ω). • Use a signal splitter to use more than 2 TVs. (Only OLED65W7*) • If the image quality is poor, install a signal amplifier properly to The Kensington security system connector is located at the rear of improve the image quality.
  • Page 24: Other Connections

    Other connections (POWER) Turns the TV on or off. Connect your TV to external devices. For the best picture and audio quality, connect the external device and the TV with the HDMI cable. You can turn your set-top box on or off by adding the set-top Some separate cable is not provided.
  • Page 25: Magic Remote Functions

    Magic remote functions Adjusts the volume level. Scrolls through the saved programmes. (MUTE) Mutes all sounds. When the message “Magic remote battery is low. Change the battery.” is - Pressing and holding the button accesses the Accessibility menu. displayed, replace the battery. (Voice recognition) To replace batteries, open the battery cover, replace batteries (1.5 V AA) matching the...
  • Page 26: Registering Magic Remote

    To use the Magic Remote, first pair it with your TV. disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM 1 Put batteries into the Magic Remote and turn the TV on.
  • Page 27: Troubleshooting

    Troubleshooting Abnormal Display • If the product feels cold to the touch, there may be a small “flicker” when it is turned on. This is normal, there is nothing wrong with Cannot control the TV with the remote control. product. •...
  • Page 28: Specifications

    Generated Sound 100.0 mm x 55.0 mm x CI Module (W x H x D) • “Cracking” noise: A cracking noise that occurs when watching or 5.0 mm turning off the TV is generated by plastic thermal contraction due to Operating temperature and humidity.
  • Page 29 (Depending on country) Digital TV Analogue TV DVB-T DVB-T2 PAL/SECAM, B/G, D/K, I Television system DVB-C SECAM L DVB-S/S2 DVB-S/S2 DVB-C DVB-T/T2 VHF III : 174 ~ 230 MHz Channel coverage UHF IV : 470 ~ 606 MHz 46 ~ 862 MHz (Band) 950 ~ 2150 MHz 46 ~ 890 MHz...
  • Page 32 Record the model number and serial number of the TV. Refer to the label on the back cover and quote this information to your dealer when requiring any service. MODEL SERIAL...
  • Page 33: External Control Device Setup

    OWNER’S MANUAL EXTERNAL CONTROL DEVICE SETUP Please read this manual carefully before operating the set and retain it for future reference. www.lg.com...
  • Page 34: Key Codes

    KEY CODES KEY CODES • This feature is not available for all models. Code Code Function Note Function Note (Hexa) (Hexa) CH +, PR + R/C Button List R/C Button CH -, PR - R/C Button Exit R/C Button Volume + R/C Button PIP(AD) R/C Button...
  • Page 35 (TV) (PC) • LGTV supports PL2303 chip-based (Vendor ID : 0x0557, Product ID : 0x2008) USB to serial converter RS-232C IN which is not made nor provided by LG. (CONTROL & SERVICE) (TV) (PC) • It can be purchased from computer stores that carry accessories for IT support professionals.
  • Page 36 EXTERNAL CONTROL DEVICE SETUP (TV) (PC) (TV) (PC) Phone jack Type RS-232C IN • You need to purchase the phone-jack to RS-232 cable required for the connection between the PC and (CONTROL & SERVICE) (PC) (TV) the TV, which is specified in the manual. RS-232C IN (CONTROL &...
  • Page 37: Communication Parameters

    EXTERNAL CONTROL DEVICE SETUP Communication Parameters • Baud rate : 9600 bps (UART) • Stop bit : 1 bit • Data length : 8 bits • Communication code : ASCII code • Parity : None • Use a crossed (reverse) cable. Command reference list (Depending on model) DATA...
  • Page 38: Transmission / Receiving Protocol

    EXTERNAL CONTROL DEVICE SETUP Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV. (j, k, m or x) [Command 2] : Second command to control the TV. [Set ID] : You can adjust the [Set ID] to choose desired monitor ID number in option menu. Adjustment range in TV is 1 to 99.
  • Page 39 EXTERNAL CONTROL DEVICE SETUP * Commands may work differently depending on model and signal. 01. Power (Command: k a) Ack [d][ ][Set ID][ ][OK/NG][Data][x] ► To control Power *On or Off of the set. * In case of video mute on only, TV will display On Transmission[k][a][ ][Set ID][ ][Data][Cr] Screen Display(OSD).
  • Page 40 EXTERNAL CONTROL DEVICE SETUP Data Min : 00 to Max : 64 * (Depending on model) Ack [i][ ][Set ID][ ][OK/NG][Data][x] 14. Bass (Command: k s) 09. Tint (Command: k j) ► To adjust Bass. ► To adjust the screen tint. You can also adjust in the AUDIO menu.
  • Page 41 EXTERNAL CONTROL DEVICE SETUP Set ID = All = 00 5th Band 20(decimal) Data 00 & 01 = Channel Data is 10 = 00 0a Acknowledgement [v][ ][Set ID][ ][OK/NG][Data][x] Data 02 = Analog Antenna TV = 00 Result = ma 00 00 0a 00 * It depends on model, and can adjust when sound mode is EQ adjustable value.
  • Page 42 EXTERNAL CONTROL DEVICE SETUP Number Data 05 = Digital Antenna TV = 02 - 22 : Antenna TV (DTV) – Don’t Use Physical Total = ma 00 00 00 11 00 01 02 Channel Number - 26 : Cable TV (CADTV) - Don’t Use Physical 2.
  • Page 43 11 11 EXTERNAL CONTROL DEVICE SETUP 24. Input select (Command: x b) (Main Picture Input) ► To select input source for main picture. Transmission [x][b][ ][Set ID][ ][Data][Cr] Data X : don’t care 00 : DTV 01 : CADTV 02 : Satellite DTV 10 : ATV Ack [t][ ][Set ID][ ][OK][Data00][Data01][Data02] ISDB-BS (Japan)
  • Page 44 EXTERNAL CONTROL DEVICE SETUP 27. Auto Configure (Command: j u) (Depending on model) ► To adjust picture position and minimize image shaking automatically. It works only in RGB (PC) mode. Transmission [j][u][ ][Set ID][ ][Data][Cr] Data 01 : Run Auto Configure Ack [u][ ][Set ID][ ][OK/NG][Data][x]...

Table of Contents