Storage And Moving The Machine - Nautilus T628 Assembly Manual / Owner's Manual

Storage and Moving the Machine

treadmill is heavy and can be awkward. Make sure that your own physical strength is capable of moving the
1. Remove the Safety Key.
WARNING! When this machine is not in operation, remove the Safety Key and keep out of the reach of children.
2. Make sure that the power switch is turned Off, and the power cord is disconnected.
Never lift the front of the machine for moving or transport. Rotating or moving parts can pinch, resulting in
personal injury.
3. You must fold the treadmill before you move it. Never move the treadmill if it is not folded.
4. Make sure that there is safe clearance around, on and above your treadmill. Make sure there is no object to spill or
cause blockage from the fully folded position.
5. Press and hold the plastic deck release handle (5a) under the end of the right side rail. Using the support bar (5b)
found below the rear of the walking belt, lift the walking deck and continue to hold the deck handle for the rst part
of the fold process (0-15 degrees). Release the deck handle and lift the walking deck fully upward and engage
the hydraulic lift. Be sure that the hydraulic lift is correctly locked in place. You will hear an audible click when the
hydraulic lift shifts into the locked position.
and pull up equally with both arms. Straighten your legs to lift. Make sure that your own physical strength is
necessary.
Do not use the walking belt or rear roller to lift the treadmill. These parts do not lock in place and can
abruptly move. Injury to you or damage to the machine can occur.
5b
5a
15°
5a
6. Make sure that the locking mechanism is engaged. Carefully pull back on the walking deck and make sure that it does
not move. When you do this, keep clear of movement path in case the treadmill lock is not engaged.
Do not lean against the treadmill when it is folded. Do not put items on it that could cause it to become
unstable or fall.
Do not connect the power cord or try to operate the treadmill in the folded position.
7. Carefully tilt the base frame of the folded treadmill a small distance back on the transport wheels (5c) while grasping
the support bar (5b).
BEFORE YOU START
5c
23