Table of Contents
Advertisement
Messages on the LCD Monitor
Message
This picture is unreadable.
There is no SD/MMC card inserted.
Card can't be used.
There is no picture.
Now searching.
There is no ink cassette.
Paper jam has occurred.
There is no ink.
Temperature is too high, please wait. • Wait for a moment. (Internal temperature)
Image Printing. Please wait do not
remove paper.
External light is entering the printer
mechanism. Please reposition the
printer.
Insert paper to print.
Remove paper.
This function can't be used because
there is no card.
This function is not available
because this card can't be used.
This function can't be used because
there is no picture on the card.
This function can't be used because
no files have DPOF setting.
Battery needs to be recharged.
Printing Image from PC.
This item can be set up only while
using AC Adapter.
Last print job interrupted. To abort
push [MENU].
Remedy
• Either the image format is incompatible or the data
has been destroyed.
• Insert the SD Memory Card or MultiMediaCard.
• Insert a card which can be used.
• Use a card with images recorded on it.
• The card is being read. Please wait for a while.
• Insert an Ink Cassette.
• Remove the jammed paper.
• Replace the Ink Cassette with a new one.
• Please wait.
• A strong light is streaming in through the paper
sliding slot. Because this may cause a malfunction,
adjust the direction of the printer.
• Insert the printing paper correctly.
• Remove the paper.
• Insert the card.
• Insert the proper card.
• Use a card with images recorded on it.
• DPOF-set files are not available and DPOF-printing
cannot be activated.
• Recharge the battery.
• Printing an image on the PC.
• This item can be set only when the AC adaptor is
connected.
• If you wish to continue printing, wait until the
message disappears.
51
Advertisement
Table of Contents
