Assembly - SBI Splitz-it 5-Ton Operator's Manual

ASSEMbLY

1. Attach the control lever assembly by screwing the knob to the end of the lever. (SEE FIGURE 3)
2. Bolt the rolling wheel bracket to the log splitter beam and log cradles using the four M6-1 x 12 bolts and corresponding lock
and flat washers provided. (SEE FIGURE 3)
3. Attach safety guard lever to the top of the rolling wheel bracket with M6-1 x 12 bolts provided. (SEE FIGURE 3)
log cradle
M6 x 1.5
washer
M6 bolts
M6 x 13 washer
Figure 3
4. Assemble the handle bars to the handle, then attache the completed handle bar assembly to the log splitter beam using the
M6 x 12 bolts, the M6 x 1.5 washer, and the M6 x 13 x 1.75 washers provided. (SEE FIGURE 4)
completed
handle bar
assembly
Figure 4
log cradle
log splitter beam
rolling wheel bracket
rolling wheel bracket
Splitz-it 5-tON electric lOg Spliter
control lever assembly
safety guard lever
M6 x 1.5
5
washer
M6 x 13 washer
3
M6 bolts
4
7