Table of Contents
Advertisement
O
PTION WASHING
When you only need the Wash, Wash/Rinse or Rinse cycles, these can be set
manually
1
Press the AUTO OFF (POWER) button to turn power on.
2
Wash , Wash+Rinse , Rinse , Rinse+Spin , Spin only options
Press the PROCESS button until above Option Washing
light is on.
When you want to only drain, wait until the water in the
washing tub drains completely and then, turn off the
power.
3
Press the WATER LEVEL button, to control the WATER LEVEL according
to the amount of laundry. If you do not choose anything, it is set the Large
WATER LEVEL automatically.
4
Add the laundry into the washing tub.
5
Press the START/PAUSE button.
6
Add the Detergent and close the lid.
Note
• When a Wash, Wash/Rinse or Rinse only option is selected, the water will not be drained off after the
wash is completed.
• If you do not specify the WATER LEVEL, then Medium will be automatically selected.
• If only Rinse is selected, the process will start from Water Supply.
(refer to p13)
(refer to page 12)
21
Advertisement
Table of Contents
