Table of Contents
Advertisement
Menu settings
Display duration of information banner
Here you define for how long the information banner, see
page 8, is to be shown with regard to a change of channel.
If you want to completely eliminate the information ban-
ner in case of a change of channel, select not any.
Automatic information banner
At the start of a new programme, the information banner
is automatically shown as a default. If you do not want this,
select off.
NOTE: This option is only available if the value set under "dis-
play duration information banner" is at least 4 seconds.
Menu language
Set the language of the OSD.
NOTE: This function is also available via "language", see
page 14.
Transparency
Here you set the transparency of the OSD. If you have dif-
ficulties to read the OSD with transparent setting, select
not any.
General
Setting a time zone
Select whether the local time offset with regard to Green-
wich mean time is to be set automatically, or if you want
to specify it yourself.
Time zone
Select the entry GMT +01:00 for Germany and Central
Europe (time difference with regard to the Greenwich
mean time).
Summer time
Set the menu item summer time to off if it is not sum-
mer time at the moment. You can also select the setting
automatic. In case of this setting, the receiver obtains
the information regarding summer time from the currently
selected channel.
Active antenna
Here you can switch the voltage supply for an active
antenna on or off.
Audio output format
For the audio output, the formats mono and stereo are
provided to you.
Calling up default settings
This function has already been described elsewhere, see
page 13.
Security
1 Press the MENU button.
2 Highlight the item safety by using the arrow button
=
or
, and press the OK button.
3 Enter the PIN code and acknowledge by OK.
NOTE: The PIN code is set to 0000 by the factory. Also
observe the displayed information. It will help you to select the
correct settings.
Observe:
- Selecting and altering the settings is carried out as usual
by means of the arrow buttons.
- A displayed window can be closed by pressing the
EXIT button.
PIN lock
Set this option to on if you want to protect your com-
plete device against unauthorized access.
When the receiver is switched on the next time, the PIN
request is effected (the PIN code is set to 0000 by the fac-
tory).
Menu lock
Set this option to on if you want to protect your menu
against unauthorized access.
When the menu is called up the next time, the PIN
request is effected (the PIN code is set to 0000 by the fac-
tory).
Protection of minors
Here you can define a minimum age for specific pro-
grammes. These programmes are PIN protected and are
only unlocked by a PIN request.
=
PERATION
O
15
Advertisement
Table of Contents
