Table of Contents
Advertisement
Chengdu Ebyte Electronic Technology Co., Ltd.
Forward error correction: The module has FEC forward error correction algorithm, which has high coding efficiency and
strong error correction capability. In the case of sudden interference, it can actively correct the interfered data packets,
greatly improving reliability and transmission distance. When without FEC, such packets can only be discarded.
Deep sleep function: When the module is in sleep mode, mode 3, the wireless receiver is turned off and the
micro-controller is in a sleep state; at this time, the power consumption of the whole device is about 2uA.
Watchdog: The module has a built-in watchdog and performs precise time layout. Once an exception occurs, the
module will restart within 1 second and continue to work according to the previous parameter settings.
Parameter saving: After the user sets the parameters, the module parameters will be saved, the power will not be lost,
and the module will work according to the set parameters after power-on.
Applicable environment: 900MHz is free frequency band, users can use it directly without application; 900MHz features
certain penetration and diffraction ability, suitable for environment with small data volume, long transmission distance
and easy to be interfered.
2. Specification and parameter
2.1 Limit parameter
Main parameter
Power supply（V）
Blocking power（dBm）
Operating temperature（℃）
2.2 Operating parameter
Main parameter
Operating voltage（V）
Communication level（V）
Operating temperature（℃）
Operating frequency（MHz）
TX current（mA）
Power
consump
RX current（mA）
tion
Sleep current （μA）
Max Tx power（dBm）
Receiving sensitivity（dBm）
Air data rate（bps）
Copyright ©2012–2018，Chengdu Ebyte Electronic Technology Co.,Ltd.
Performance
Min.
0
-
-40
Performance
Min.
Typ.
3.3
5.0
3.3
-40
-
850.125
-
650
16
2
29.5
30.0
-147
-148
0.3k
2.4k
Max.
Voltage over 5.5V will cause permanent
5.5
damage to module
Chances of burn is slim when modules
10
are used in short distance
85
Max.
5.5
≥5.0 V ensures output power
For 5V TTL, It is recommended to add
level conversion
85
Industrial design
930.125
Support ISM band
Instant power consumption
Software is shut down
30.5
-149
Air data rate is 2.4kbps
62.5k
Controlled via user's programming
E22-900T30S1C User manual
Remark
/
Remark
6
Advertisement
Table of Contents
