Remington Shine Therapy PRO AC9300 Manual page 4

ENGLISH
• Do not allow any part of the appliance touch the face, neck or scalp.
• During use, always ensure the inlet and outlet grilles are not blocked in any way as
this will cause the unit to automatically stop. If this should occur, switch off and
allow the unit to cool.
• Keep the power plug and cord away from heated surfaces.
• Do not leave the appliance unattended while plugged in.
• Do not place the appliance on any soft furnishings.
• Do not use attachments other than those we supply.
• Do not set the appliance down while still on.
• Do not twist or kink the cable, or wrap it round the appliance.
• Do not use the appliance if it is damaged or malfunctions.
• Check the cord regularly for any sign damage.
• This appliance is not intended for commercial or salon use.
• WARNING: Contains traces of nuts.
PARTS
1. Grille
2. Heat selector switch (N, O, P)
3. Speed selector switch (0, F , E)
4. Cool shot ( )
5. Styling concentrator attachment
INSTRUCTIONS FOR USE
• Wash and condition your hair as normal.
• Squeeze out excess moisture with a towel and comb through.
• Hairsprays contain flammable material – do not use while using this product.
• Fit accessory attachments to the front of the hairdryer then twist clockwise to lock in
place. Take care when you do this because the attachments can become hot during
use.
1. Plug the product into the mains power supply.
2. Switch your hairdryer on and select the desired speed setting (low F or high E)
using the speed selector switch.
3. Select the desired heat setting (low N, medium O or high P) using the heat selector
switch.
4. After use, turn the appliance off and unplug it.
5. Let the appliance cool down before cleaning or storing away.
4
6. Diffuser attachment
7. Removable easy clean rear grille
8. Hang up loop
9. Cord