Ryobi RPD1200-K Original Instructions Manual
Ryobi RPD1200-K Original Instructions Manual

Ryobi RPD1200-K Original Instructions Manual

Percussion drill
Hide thumbs Also See for RPD1200-K:

Advertisement

Quick Links

ORIGINAL INSTRUCTIONS
Percussion Drill
RPD1200

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RPD1200-K and is the answer not in the manual?

Questions and answers

Summary of Contents for Ryobi RPD1200-K

  • Page 1 ORIGINAL INSTRUCTIONS Percussion Drill RPD1200...
  • Page 2 Important! It is essential that you read the instructions in this manual before operating this machine. Subject to technical modifications.
  • Page 3: General Power Tool Safety Warnings

    Safety tool. Do not use a power tool while you are GENERAL POWER TOOL SAFETY WARNINGS tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious WARNING personal injury. Read all safety warnings and all instructions.
  • Page 4: Drill Safety Warnings

    Safety power tool repaired before use. Many accidents INTENDED USE are caused by poorly maintained power tools. a) Drilling and screw driving in all types of wood. f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges b) Drilling in metals: steel, brass, aluminum sheets, are less likely to bind and are easier to control.
  • Page 5: Environmental Protection

    Safety ENVIRONMENTAL PROTECTION Recycle raw materials instead of disposing of as waste. The machine, accessories and packaging should be sorted for environmental- friendly recycling. SYMBOLS Safety alert Class II tool, double insulation No-load speed Wood Metal Masonry Chuck Capacity Impact Regulatory Compliance Mark (RCM).
  • Page 6 Unpacking...
  • Page 7 Getting started...
  • Page 8 Getting started...
  • Page 9 Operation...
  • Page 10 Operation...
  • Page 11 Operation...
  • Page 12: Product Specifications

    PRODUCT SPECIFICATIONS Model RPD1200 Voltage 220-240V 50 Hz Input 1200 W No-load speed 0-1,200 / 0-3,200 min Blows per minute (Impact rate) 0-19,200 / 0-51,200 min Chuck capacity 13 mm Drilling capacity in wood 50 mm in metal 16 mm in masonry 22 mm Weight...
  • Page 13 Techtronic Industries (Australia) Pty. Ltd. Level 1, 660 Doncaster Road Doncaster, VIC 3108, Australia Techtronic Industries New Zealand Ltd. 18-26 Amelia Earhart Avenue Mangere, Auckland 2022, New Zealand 20131106...

This manual is also suitable for:

Rpd1200

Table of Contents