Related Manuals for California Air Tools 8010DSPCAD
Summary of Contents for California Air Tools 8010DSPCAD
- Page 1 ULTRA QUIET & OIL FREE AIR COMPRESSOR OwnER'S MAnUAL CALIFORnIA AIR TOOLS 8010DSPCAD WWW.CALIFORNIAAIRTOOLS.COM Customer Support 1-866-409-4581...
-
Page 2: Table Of Contents
______________________7 package contents & assembly____________________7 Inspect for damage _____________________________7 Save packaging ________________________________7 compressor location ___________________________7 thank you for purchasing a california air tools, Inc. electrical power ________________________________8 air compressor. operatIng the aIr compreSSor ________________8 Introduction ___________________________________8 assembly _____________________________________8 test run &... -
Page 3: Important Safety Instructions
AIR COMPRESSOR how to find a local service center: DANGER even quality built equipment might need service or repair parts. Contact the California Air Tools Customer Service department: Phone: 1-866-409-4581 Online: WWW.CALIFORNIAAIRTOOLS.COM please provide the information below: KICKBACK Model number and Serial number and specifications shown on the Model number/Serial number plate. - Page 4 AIR COMPRESSOR WARNING WARNING RISK TO BREATHING FLYING OBJECTS Flying objects can cause injury to the eyes, head and Dust or dust-like particulates caused by other parts of the body. power-sanding, sawing, grinding, drilling or any other construction-like activities can contain Air-powered equipment and power tools are capable contaminants that are harmful to breathe.
- Page 5 AIR COMPRESSOR WARNING WARNING EXPLOSION EXPLOSION FIRE Improper care could lead to the air tank bursting or Use caution to minimize risk of fire or explosion. exploding. It is normal for the air compressor motor and Drain air tank daily or after each use to prevent pressure switch to produce sparks while operating.
-
Page 6: Air Compressor Components
AIR COMPRESSOR Customer Support: 1-866-409-4581... -
Page 7: Pre-Operation Checklist
If damaged, have an authorized service center inspect and test the model: 8010dSpcad air compressor to ensure that is working properly. package contents: Save packaging * Air Compressor &... -
Page 8: Electrical Power
AIR COMPRESSOR OPeRATINg The AIR electrical power COMPReSSOR electrical power requirements DANGER Save this manual for future reference. SHOCK There is a danger of electric shock. Use only undamaged electrical cords. DO NOT touch bare wires or receptacles. DO NOT operate air compressor in wet weather or in wet conditions. -
Page 9: Test Run & Break-In Period
AIR COMPRESSOR test run WARNING before using the air compressor for the first time, complete a test run as follows: 1. Turn the power switch to the OFF position. Plug the power supply cord into a power supply socket. Start the air compressor by turning the power switch to the ON position. -
Page 10: Maintenance
AIR COMPRESSOR MAINTeNANCe air drying column - desiccant draining the air tank After 4000 hours of use the Activated Alumina desiccant needs to The frequency at which you should drain the air tank and air dryer be replaced. depends on the environmental conditions and the amount of unscrew the air drying column bottom cap. -
Page 11: Troubleshooting
AIR COMPRESSOR TROubLeShOOTINg proBlem poSSIBle cauSe poSSIBle SolutIonS Let the compressor build pressure in the tank, to the maximum pressure if possible. brush soapy Pressure drop in the tank. Air leaks at connections. water on air connections and look carefully for air bubbles. -
Page 12: Specifications
AIR COMPRESSOR SPeCIFICATIONS electrical circuit Pressure switch Overload protector Electric cord Motor for motor (MAX temperature 135°C) Red cords for Solenoid Capacitor valve Electric cord for motor Earth wire (Green) air passage drawing Air intake Pressure switch Safety valve Drain valve Pressure gauge Pressure gauge Regulator... - Page 13 This warranty does not transfer to subsequent owners. California Air Tools Inc. will repair or replace, at its option, any parts of the portable air compressor that are proven by an authorized service center to be defective in material or workmanship under normal use during the applicable warranty time period as stated below.
-
Page 14: Warranty
Warranty registration with California Air Tools Inc. is required on all products. you can mail the enclosed registration form. Warranty is also available by keeping and showing your original receipt from the date of purchase to an Authorized California Air Tools Service Center. -
Page 15: Product Registration
Other Features (describe) _____________________________________________________________________ What other Power equipment are you interested in purchasing in the future? _____________________________ Thank you for registering your product. Mail to: California Air Tools 8560 Sieper Viva Road, unit 3 San diego, CA 92154 Customer Support: 1-866-409-4581...