Operation And Safey Decals - MULTIQUIP Whiteman Series Operation Manual

WM-70 PLASTER/MORTAR MIXER — OPERATION AND SAFETY DECALS
Machine Safety Decals
The MQ Whiteman WM-70 mortar and plaster mixer is equipped with a number of safety decals. These decals are provided
for operator safety and maintenance information. Figure 4 below illustrates these decals as they appear on the machine.
Should any of these decals become unreadable, replacements can be obtained from your dealer.
WARNING
!
CRUSH HAZARD AREA. KEEP HANDS
AND FINGERS CLEAR OF SAFETY
GRATE AT ALL TIMES.
P/N: DCL335
WARNING
!
STAND CLEAR
OF DUMP
HANDLE.
HANDLE
KICK-BACK
IS POSSIBLE.
P/N: DCL280A
WHEEL
WHEEL
P/N DCL151
MODEL
SERIAL NO.
CONTACT MQ PARTS
DEPARTMENT
P/N: 13118
PAGE 14 — WM-70 PLASTER/MORTAR MIXER — OPERATION MANUAL — REV. #1 (08/09/04)
DCL335
P/N: 504713
P/N: 35137
PUSH
TO STOP
P/N: EM948630
P/N: 504714
Figure 4. Mixer Operation and Safety Decals
P/N 513522
WARNING
513479
DO NOT REMOVE DRUM SAFETY GRATE.
SHUT OFF ENGINE/MOTOR BEFORE
PUTTING HANDS IN MIXER DRUM
P/N 513479
WARNING
CRUSH HAZARD CRUSH AND CUT
HAZARD
Keep guards and
doors in place. Moving parts can cut
Shut-off engine and crush.
before inspection SHUT OFF engine
or maintenance before putting hands
in mixing drum
DCL160
P/N: DCL160A
P/N 948121
P/N: 51064