Philips HR2752/53 Manual page 7

using the appliance
1 Remove the protective cover (Fig. 2).
2 Put a glass under the spout.
3 Push down the spout to open it (Fig. 3).
4 Press a halved fruit firmly onto the cone. (Fig. 4)
The appliance starts to work automatically.
,
5 Push up the spout after use to ensure that no juice drips out of the appliance (Fig. 5).
Tip: The appliance is easier to clean if you do so immediately after use (see chapter 'Cleaning').
cleaning
1 Unplug the appliance after use.
2 Remove the cone, sieve and sieve holder from the appliance (Fig. 6).
3 Push down the spout completely to be able to clean it properly (Fig. 7).
You cannot detach the spout from the sieve holder.
4 Rinse the cone, sieve and sieve holder under the tap and clean them with some washing-up
liquid (Fig. 8).
You can also clean these parts in the dishwasher.
5 Clean the motor unit with a moist cloth.
Never immerse the motor unit in water nor rinse it under the tap.
Environment
Do not throw away the appliance with the normal household waste at the end of its life, but
,
hand it in at an official collection point for recycling. By doing this, you help to preserve the
environment (Fig. 9).
guarantee & service
If you need service or information or if you have a problem, please visit the Philips website at
www.philips.com or contact the Philips Consumer Care Centre in your country (you find its phone
number in the worldwide guarantee leaflet). If there is no Consumer Care Centre in your country,
go to your local Philips dealer.
4222_005_0061_2_DFU-Booklet_A5_v1.indd 7
EnglisH
7
2/17/11 3:17 PM