Loading The Batteries - Sharp HR350S Operation Manual

Major Components

Loading the Batteries

1
While pressing Y down,
slide the battery cover in
the direction of the
arrow.
NOTE
• Do not subject the remote control unit to shock, water or excessive humidity.
• The remote control unit may not function if the Recorder's remote sensor is in direct sunlight or any other strong light.
• Incorrect use of batteries may cause them to leak or burst. Read the battery warnings and use the batteries properly.
• Do not mix old and new batteries, or mix different brands.
• Remove the batteries if you will not use the remote control unit for an extended period of time.
Operating range of remote control
Remote sensor
About 30° About 30°
Front 7m
18
GB
DV-HR300S-013-019
All manuals and user guides at all-guides.com
2
Load the batteries.
Load the two R-03 size batteries ("AAA"
size, UM/SUM-4) supplied with the
remote control unit. Make sure that the
battery poles
as indicated.
Remote control
unit
18
and are positioned
04.1.14, 3:40 PM
3
Slide the battery cover
in the direction of the
arrow until it clicks.