Onkyo TX-RZ620 Basic Manual page 40

> Specifications > Advanced Setup
Setting Item Default Value
Impose OSD On
Mini Player OSD Always On
Screen Saver 3 minutes
8
> Listening Modes
Setting Details
Set whether or not to display the information on
the TV when the volume is adjusted or input is
changed, for example.
"On": OSD displayed on the TV.
"Off": OSD not displayed on the TV.
• OSD may not be displayed depending on the
input signal even if "On" is selected. If the
operation screen is not displayed, change the
resolution of the connected device.
You can play on the TV the images from another
input selected immediately prior while you are
playing the audio from NET or BLUETOOTH input.
After switching to NET or BLUETOOTH, play the
images and audio, then when you press MODE
on the remote controller, the image is displayed in
full-screen mode, and the audio information (Mini
Player) for NET or BLUETOOTH is displayed in
the corner of the screen. You can set whether to
display this Mini Player on the screen all the time.
"Always On": The Mini Player is displayed all the
time.
"Auto Off": The Mini Player turns off automatically
30 seconds after being displayed. It is displayed for
30 seconds after operations such as changing the
volume.
• Each press of the MODE button displays or
turns off the video.
• This cannot be selected if "Impose OSD" is set
to "Off".
Set the time to start the screen saver.
Select a value from "3 minutes", "5 minutes", "10
minutes" and "Off".
> Network Functions
■ 2. HDMI Input
You can change input assignment between the input selectors and HDMI IN jacks.
Setting Item Default Value
HDMI 1 （HDCP
BD/DVD
2.2）
HDMI 2 （HDCP
CBL/SAT
2.2）
HDMI 4 （HDCP
GAME
2.2）
HDMI 3 （HDCP
STRM BOX
2.2）
HDMI 5 （HDCP
PC
2.2）
CD ---
> Basic Manual
Troubleshooting Supplementary Information, etc. |
Setting Details
"HDMI 1 (HDCP 2.2)" to "HDMI 6 (HDCP 2.2)":
Assign a desired HDMI IN jack to the BD/DVD
button. If you do not assign a jack, select "---".
To select an HDMI IN jack already assigned to
another input selector, change its setting to "---"
first.
"HDMI 1 (HDCP 2.2)" to "HDMI 6 (HDCP 2.2)":
Assign a desired HDMI IN jack to the CBL/SAT
button. If you do not assign a jack, select "---".
To select an HDMI IN jack already assigned to
another input selector, change its setting to "---"
first.
"HDMI 1 (HDCP 2.2)" to "HDMI 6 (HDCP 2.2)":
Assign a desired HDMI IN jack to the GAME
button. If you do not assign a jack, select "---".
To select an HDMI IN jack already assigned to
another input selector, change its setting to "---"
first.
"HDMI 1 (HDCP 2.2)" to "HDMI 6 (HDCP 2.2)":
Assign a desired HDMI IN jack to the STRM BOX
button. If you do not assign a jack, select "---".
To select an HDMI IN jack already assigned to
another input selector, change its setting to "---"
first.
"HDMI 1 (HDCP 2.2)" to "HDMI 6 (HDCP 2.2)":
Assign a desired HDMI IN jack to the PC button. If
you do not assign a jack, select "---". To select an
HDMI IN jack already assigned to another input
selector, change its setting to "---" first.
"HDMI 1 (HDCP 2.2)" to "HDMI 6 (HDCP 2.2)":
Assign a desired HDMI IN jack to the CD button.
If you do not assign a jack, select "---". To select
an HDMI IN jack already assigned to another input
selector, change its setting to "---" first.