Table of Contents
Advertisement
TAP method
To enter text in tap mode, press a keypad key
repeatedly to cycle through the letters and numbers
on the keypad. Repeat this step to enter each letter. To
use tap mode, it must be assigned as primary or
secondary text entry mode (see page 30). In any text
#
entry screen, press
g
the
(if it is the primary entry mode) or
secondary mode) appears.
numeric mode
In any text entry screen, press
gm
modes until the
(numeric) indicator appears. Press
keypad keys to enter the numbers you want.
symbol mode
In any text entry screen, press
[
modes until the
(symbol) indicator appears. Press a
keypad key to show its symbols at the bottom of the
display.
Highlight the symbol you want and press SELECT.
to switch entry modes until
m
(if it is the
#
to switch entry
#
to switch entry
delete letters & words
Place the cursor to the right of the text you want to
delete, and then:
• Press DELETE to delete one letter at a time.
• Press and hold DELETE to delete all text.
handsfree speaker
You can use your phone's handsfree speaker to make
calls without holding the phone to your ear.
To turn the speaker on during a phone call,
press SPKR ON. To turn the speaker off, press SPKR OFF.
Note: The handsfree speaker does not work when
your phone is connected to a handsfree headset.
codes & passwords
Your phone's four-digit unlock code is originally set to
1234 or to the last four digits of your phone number.
The six-digit security code is originally set to 000000.
basics
31
Advertisement
Table of Contents
