Other - Hoshizaki KMD-901MWH Service Manual

5. Other

Problem
[1] Icemaker will not stop
when bin is filled with
ice.
[2] Abnormal noise.
[3] Ice in storage bin
often melts.
Possible Cause
a) Bin Control
a) Pump Motor
b) Fan Motor (except
water-cooled model)
c) Compressor
d) Refrigerant Lines
a) Drain Line(s)
b) Icemaker and Bin
c) Ice Cube Guide
1. Defective.
1. Bearings worn out.
1. Bearings worn out.
2. Fan blade deformed.
3. Fan blade does not
move freely.
1. Bearings worn out or
cylinder valve broken.
2. Mounting pad out of
position.
1. Rub or touch other
lines or surfaces.
1. Plugged.
1. Drains not run
separately.
1. Out of position.
Circulated water falls
into bin.
40
Remedy
1. See "II.E.2. Bin Control
Check Procedure."
1. Replace.
1. Replace.
2. Replace.
3. Replace.
1. Replace.
2. Reinstall.
1. Reposition.
1. Clean.
1. Separate the drain lines.
1. Place in position.