Childproof Lock; Activating And Deactivating; Cleaning; Cleaning Agents - Bosch HKQ38A150M/07 Instruction Manual

Free standing cooker
Table of Contents

Advertisement

Childproof lock

en
AChildproof lock
Y our appliance is equipped with a childproof lock so
C h i l d p r o o f l o c k
that children cannot switch it on accidentally or change
any settings.
Notes
If a hob is connected, it will not be affected by the
childproof lock on the oven.
After a power cut, the childproof lock will no longer
be active.

Activating and deactivating

To activate the childproof lock, the function selector
must be set to the "Off" position.
Press and hold the
button for approx. 4 seconds.
D
appears in the display. This activates the
†'""
childproof lock.
If a timer duration
Note:
continue to count down. While the childproof lock is
active, the timer duration cannot be changed.
To deactivate the childproof lock, press and hold the
button again for approx. 4 seconds until
D
goes out on the display.
DCleaning
W ith good care and cleaning, your appliance will retain
C l e a n i n g
its appearance and remain fully functioning for a long
time to come. We will explain here how you should
correctly care for and clean your appliance.

Cleaning agents

Damage to the various different surfaces caused by
using the wrong cleaning agent can be avoided by
observing the following instructions.
When cleaning the hob do not use
undiluted washing-up liquid or dishwasher detergent,
scouring pads,
abrasive cleaning agents such as oven cleaner or
stain remover,
high-pressure cleaners or steam jets.
Do not clean individual parts in the dishwasher.
When cleaning the oven do not use
sharp or abrasive cleaning agents,
cleaning agent with a high alcohol content,
scouring pads,
high-pressure cleaners or steam jets.
Do not clean individual parts in the dishwasher.
Wash new sponges thoroughly before first use.
:
Warning – Risk of burns!
The appliance becomes very hot. Never touch the
interior surfaces of the cooking compartment or the
20
has been set, this will
Q
†'""
heating elements. Always allow the appliance to cool
down. Keep children at a safe distance.
Zone
Cleaning agent
Stainless steel sur-
Hot soapy water:
faces*
Clean with a dish cloth and dry with a soft
cloth. On stainless steel surfaces, always wipe
(depending on appli-
parallel to the natural grain. Otherwise, you
ance model)
may scratch the surface. Remove patches and
splashes of limescale, grease, starch and albu-
min (e.g. egg white) immediately. Corrosion
can form under such patches and splashes.
Special care products suitable for hot stainless
steel surfaces are available from our after-
sales service and from specialist retailers.
Apply a thin layer of care product with a soft
cloth.
Enamel, painted, plas-
Hot soapy water:
tic and screen-printed
Clean with a dish cloth and dry with a soft
surfaces*
cloth. Do not use glass cleaner or glass scrap-
ers for cleaning.
(depending on appli-
ance model)
Control panel
Hot soapy water:
Clean with a dish cloth and dry with a soft
cloth. Do not use glass cleaner or glass scrap-
ers for cleaning.
Upper glass cover*
Glass cleaner:
Clean with a soft cloth.
(depending on appli-
You can remove the upper glass cover for
ance model)
cleaning. To find out how to do this, please
refer to the section
Rotary knobs
Hot soapy water:
Do not remove.
Clean with a dish cloth and dry with a soft
cloth.
Hob surround
Hot soapy water:
Do not clean with a glass scraper, lemon juice
or vinegar.
Gas hob and pan sup-
Hot soapy water.
ports*
Use very little water. Water must not be
allowed to enter the appliance through the
(depending on appli-
base of the burners.
ance model)
Clean off boiled-over liquids and spilt food
immediately.
You can remove the pan supports.
Cast iron pan supports*:
Do not clean in the dishwasher.
Gas burners*
Remove the burner head and cap and clean
with hot soapy water.
(depending on appli-
Do not clean in the dishwasher.
ance model)
The gas outlet openings must remain unob-
structed at all times.
Ignition plugs: Small, soft brush.
The gas burners only work properly when the
ignition plugs are dry. Dry all parts thoroughly.
Ensure that they are refitted correctly.
The burner caps are coated in black enamel.
The colour may change over time. This does
not impair their performance.
* Optional (available for some appliances, depending on the appliance
model)
Upper glass
cover.

Advertisement

Table of Contents
loading

Table of Contents