Connecting To Your Wireless Network; Uninstalling The Software And Drivers - Belkin F5D6050 User Manual

network
automatically. If you are using encryption, you will have to set the
encryption settings on your wireless router or access point before the
Adapter can successfully connect to your wireless network. For
information
about configuring your Adapter, see the next section in this manual.

CONNECTING TO YOUR WIRELESS NETWORK

8
If you already have a wireless router or an access point in your home or
office,
the Adapter will automatically attempt to connect to your wireless
network. In
most cases, the Adapter will be able to connect to your network
automatically. If
your wireless network is using encryption, you will need to set the
encryption
settings of your Adapter to match that of your wireless network. For
information
about configuring your Adapter, see the next section in this manual.

UNINSTALLING THE SOFTWARE AND DRIVERS

9
If you need to remove the software and drivers for any reason, you can
easily
accomplish this in one of two ways. You can insert the software CD and
click on
the "Uninstall" option in the menu, or you can go to the Windows Control
Panel
and select the "Add/Remove Programs" option. The Belkin wizard will
walk you
through the removal process.
When you launch the Wireless LAN Monitor Utility (the Utility), you will
be
presented with the screen below. The following small icon will also be
present in
your system tray.
The Utility can be set to always be on top of everything else
on your desktop when it is open. This setting can be changed
if you right-click on the icon in your system tray.
Place a check mark next to "Always on top" to keep the